Recent content by t_b

@Richard Since i have the same issues it sould nearly the same like in @OliverB's case: /etc/network/interfaces (CT) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.2 netmask 255.255.255.0 gateway 10.10.10.1 /etc/resolv.conf (CT) # ---...

@OliverB see: https://forum.proxmox.com/threads/no-connection-to-the-internet-from-container.33401/#post-164030

@OliverB BTW, i'm getting exactly the same responses: 22:31:00.897158 6e:61:4d:af:d6:2c > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 10.10.10.1 tell 10.10.10.2, length 28 22:31:00.897248 fe:1a:a1:78:1a:2e > 6e:61:4d:af:d6:2c, ethertype ARP (0x0806), length 42: Reply...

@manu So, docker is away until the problems solved - since docker seems not to be the problem. I tried a lot and nothing helped. i compared the configuration with this of my personal instance with no luck.

@manu You're right, that would be better, but since it's already a "virtualized root server" i'm not abled to create KVM machines, only containers. On the other hand @OliverB seem not having docker and running into the same issues. I'm willing to test remove the docker installation restart the...

@manu I've already tried that, but i've updated the vmbr0 section again with post-up echo 1 > /proc/sys/net/ipv4/ip_forward post-up iptables -t nat -A POSTROUTING -s '10.0.0.0/24' -o eth0 -j MASQUERADE post-down iptables -t nat -D POSTROUTING -s '10.0.0.0/24' -o eth0...

I've used the dns tab on the ui which generated following content in the container # --- BEGIN PVE --- domain.tld nameserver 80.237.x.y nameserver 80.237.x.z # --- END PVE --- This are the nameserver from the hosting provider

Hello, I currenty facing network problems with the virtual adapter for the container network. Here is my network config /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 5.35.x.y netmask 255.255.255.0 gateway 5.35.x.y...

@dcsapak it's working!

@dcsapak: funny that you are mentioned it, yes @tom: also i will give qemu a try.

seems to be a little bit frustating since i'm not sure how perfomant qemu is (in comparision to an lxc container or the host system). What are the issues that you recommend to install docker inside an vm instead on the host system?

Hi tom, thanks for fast response. Do you mean (K)VM or LXC container? Since the System is already virtualized Server (KVM) it's only possible to create LXC container. Moreover we want to use Portainer for administation of the docker container. There is already another thread with Docker in LXC...

Hello, I've currenty setup another proxmox instance, which has some special needs. Since we have heterogenous systems (existing containers) and new docker(-compose) based solutions we try to get them all on one system. Therefore i installed a fresh proxmox system. The second step was to install...

since host and nfs server/client aren't in the same network, is not an option.

since i've not seen an bind example with nfs, is this the correct syntax for the container: lxc.aa_profile: unconfined lxc.mount.entry: 10.0.2.20:/var/atlassian var/atlassian nfs bind,create=dir,optional 0 0 Dec 13 09:57:22 proxmox kernel: [736791.256106] device veth222i0 entered...