Ich habe einen DL380p Gen8 HP Server mit einer H220 HBA Karte verbaut, da ich meine Festplatten direkt ins Betriebssystem durchreichen möchte. Das installieren von Proxmox im zfs RAID 1 funktioniert ohne Probleme. Es werden auch alle Festplatten erkannt, jedoch wenn ich den Server anschließend...
Okay, that doesn't necessarily sound like the most elegant solution. If necessary, I simply have to install a second RAID controller that is suitable for passing hard drives through (e.g. H220) and connect my two SSDs there and the rest, which I don't have to boot from, can also run via the p420i.
I found this "documentation". I'd try the steps with the proxmox-boot-tool. But I have to questions about this. What happens if one of the RAID1 zfs disks breaks. Can I easily replace the disk and rebuild the zfs raid even if the boot partition is on the SD card? And I think the SD Card is a...
Update: I ran the installer again and strangely it ran without any problems or error messages. Now I have the problem that I've heard about several times, namely that I can't boot from a hard drive that's passed through in hba mode. In this case, am I forced to move the boot partition to another...
Would it be possible to first install Proxmox on a single hard drive (HDD) and after the installation create the ZFS RAID with the two SSDs and then reinstall proxmox on the existing RAID1, or does the installer not recognize the existing RAID?
I have a dl380p gen8 with a p420i controller in hba mode. 2 SSDs (OS) and 6 HDDs (DATA) are installed. I tried to install Proxmox on the two SSDs in RAID 1 (ZFS). I was able to select the two hard drives and started the installation, but I got the following error message: unable to create zfs...
Also wenn ich free -m ausführe sagt er mir, dass er tatsächlich das benutzt was auch unter dem summary reiter in Proxmox steht. Aber trotzdem bleibt der Ram konstant genau gleich bei (23.67 GiB of 31.35 GiB). Normalerweise schwankt das doch immer ein bisschen. Genau wie bei der CPU und dem IO...
Ich speichere meine Backups täglich auf eine extern eingebundene NAS. Das Problem ist, dass jedes mal, wenn meine Backups gemacht werden meine RAM usage in die Höhe schießt. Normalerweise ist sie bei 30% aber wenn die Backups laufen geht die usage bis auf 80% hoch. Merkwürdigerweise bleibt sie...
Die Zeiten stimmen überein.
Als App nutz ich Aegis.
Ich finde es nur seltsam, dass als ich einmal ein test qr-code in einem anderen Forum zu dem Thema einlesen wollte hat das ohne Probleme funktioniert.
Ich würde gerne für meinen root user eine 2FA einrichten aber leider wird der qr code nicht erkannt. Jeder andere QR-Code funktioniert nur der nicht.
Hat jemand eine Ahnung woran das liegen könnte.
Danke im Voraus.
1. 2x2TB
2. Raid 1
3. Also der Server war jetzt eine Weile aus. Schon etwa 2 Wochen und davor hatte ich jeden Tag meine VMs gesichert.
4. Eigentlich schon
5. Die neueste
Aber da dort eh nicht viel drauf ist und ich alles gesichert habe werde ich evtl. mal den Server neu aufsetzen und mal sehen...
Leider bootet mein Proxmox seit einiger Zeit nicht mehr wirklich.
Das einzige was ich sehe, wenn ich mich mit einem Bildschirm direkt drauf schalte ist:
/dev/mapper/pve-root: clean files ****/***** blocks ****/*****
Auch nach 30min warten passiert nichts.
Hat jemand eine Idee wie ich das lösen...
Ich habe nachdem ich alles genau so eingestellt hatte die VM erneut gestartet und proxmox zerschießt sich wieder.
Ich habe mal gelesen, dass es daran liegen kann, dass die GPU im falschen PCIe Slot steckt, obwohl bei mir die GPU eigentlich schon in dem Hauptslot steckt.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.