Recent content by shocker

Seem stable for the last 24h, I think something was wrong with the kernel. Maybe this will help others.

I have installed the kernel 5.15.17-1-pve and reverted the machine version to the latest to see if there is any improvement.

Hello, I've been reading the forums for similar issues and seems that there were some similarities with some fixes, but somehow seems that the issue I have is different. Sorry if I'm raising a duplicate post. I've done a full upgrade from v6 to v7 without any issues. After the upgrade, one...

Managed to make it work :) instead of adding the VLAN on the bond interface I have added it at the vmbr0 interface and created the vmbr0.502. Now everything is working as intended :) Not sure if this is a feature or a bug, but in this setup is working, maybe it will help others in the future.

I have removed from the networking bond0.502 and vmbr0. Now from the VM I can ping and see the traffic from 502 VLAN. Adding again bond0.502 on the host machine breaks the traffic. Seems that if I'm tagging the VLAN locally it will not send it over via the bridge? :rolleyes: Did anyone play...

Updated configuration auto lo iface lo inet loopback auto eno1 iface eno1 inet manual mtu 9000 auto eno2 iface eno2 inet manual mtu 9000 iface eno3 inet manual iface eno4 inet manual auto bond0 iface bond0 inet manual bond-slaves eno1 eno2 bond-miimon 100...

From vmbr1 I have other VLANs that work ok. The problem is only with vlan502 that is assigned to the proxmox host for management. Also, the mac from VM, mac from the host machine is visible on the switch, no issue on L2. I think I'm missing something from the logic !? :)

Yes, I have restarted the network interface after changing the options. The VM is the gw for the vmbr0 vlan502.

Thanks for the feedback! Tried that, not working. The initial config was without vlan aware option.

Hello, I'm trying to migrate an old router from a physical machine to a KVM on a proxmox. There will be two proxmox machines in a cluster-based for high availability. For the moment I have strange behaviour and I think it's something from the logic that I'm missing from. I have lots of VLAN...

Found the issue, somehow the memory changed for those two machines instead of 24GiB was 24M and it was due to the memory issue

Hello, I have performed today update the the latest proxmox via apt update/upgrade and now I have two linux machines that hang after selecting kernel. There is no error message in syslog nor on the console. After few minutes the VM state is with a yellow question mark (hang). Any hint what...

I've checked the forum for similar issues, and seems that the only issues found with the watchdog were the ones when a node is restarting by itself, not the one that I currently have. Currently my nodes are stable, the only behavior that i'm encountering is after one node is coming up from a...

Thank you for this feedback! I'm using supermicro hw with IPMI_watchdog module. I don't have any kernel panics just the nodes restart behaviour when I have the nodes back. I'll check the ITCO_wdt to see what I can do with it if not I'll go with the HA removal. Thanks, Alex

Well, sometimes a node just restart by itself due to power loss or other hw issues and I cannot control the HA. So I need to turn off HA permanently in order to avoid this ?