Recent content by Sarge

  1. Slow disk speed on Windows VM

    Hi, I installed a fresh Proxmox VE and tested the speed of the disk: root@pve:~# dd if=/dev/zero of=./test bs=1G count=1 1+0 records in 1+0 records out...
  2. 3-node cluster. HA doesn't work.

    Hi, After edit /etc/apt/sources.list, and upgrade all nodes with: # apt-get update & apt-get dist-upgrade HA is working. Thank you!
  3. 3-node cluster. HA doesn't work.

    Thanks, But my version on all nodes is: root@pve1:/etc/default# pveversion pve-manager/4.1-1/2f9650d4 (running kernel: 4.2.6-1-pve) I'm upraded nodes via GUI, without result. VM does not automatically migrate on another node! What else can be made?
  4. 3-node cluster. HA doesn't work.

    Hello, I installed a Proxmox 4.1 cluster of 3 nodes, with iSCSI Nexenta storage. Then add the VM:104 in HA group. All is ok. But when I rebooting(or shutdown "ipmitool power off") node2(pve2) with VM:104, the VM does not automatically migrate on another node! In HA status: Service vm:104(pve2...
  5. Problem with ISCSI target on Nexentastor

    Yes, my bad! Thanks! My error, name of pool - volume1: root@nexenta:~# zpool status pool: volume1 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM volume1 ONLINE 0 0 0 c0t1d0 ONLINE 0 0 0...
  6. Problem with ISCSI target on Nexentastor

    I made it in the beginning, according to the manual. And now: root@pve1:~# ssh -i /etc/pve/priv/zfs/172.16.2.150_id_rsa root@172.16.2.150 root@nexenta:~# exit logout Connection to 172.16.2.150 closed. root@pve1:~# What it is possible to make?
  7. Problem with ISCSI target on Nexentastor

    Thanks, I made on nexenta: -bash-4.2$ su Password: root@nexenta:~# rm /root/.bash_profile root@nexenta:~# With no result :-( What it is possible to make?
  8. Problem with ISCSI target on Nexentastor

    Thanks! I added the ZFS over ISCSI as in instruction: https://pve.proxmox.com/wiki/Storage:_ZFS_over_iSCSI zfs: ZFS_over_ISCSI iscsiprovider comstar portal 172.16.2.150 blocksize 4k target iqn.2010-08.org.illumos:02:40dbea77-4e90-6ce1-cacd-93c71e9e2102...
  9. Problem with ISCSI target on Nexentastor

    Thank you! With this manual for LVM: https://pve.proxmox.com/wiki/Storage_Model#LVM_Groups_with_Network_Backing - all done. But there was other problem. I can't take snapshot! Where I was mistaken?
  10. Problem with ISCSI target on Nexentastor

    Hello, I have setup ISCSI target on Nexentastor. Created data store, zvol,.. etc as in the manual. But in Proxmox I have problem. When I connect to the ISCSI target, I see the LUN as image, and I can not do anything with it. Option Use LUN directly - ineffectual. For test, with MS iscsi...
  11. Proxmox 4.1 HA cluster, no automatic migration VM

    OK. Can I use the same fensing in older versions? Or only a watchdog fencing?
  12. Proxmox 4.1 HA cluster, no automatic migration VM

    Thank you for answer, When I pulled the power cable of node, VM is fenced, and migrated after 1.5 min. But how I can reduce migration time, up to 15 seconds? Is it possible? And whether I understand that there is a built-in Proxmox, who understands how the shutdown. Via IPMI or pulled the power...
  13. Proxmox 4.1 HA cluster, no automatic migration VM

    Hi, I installed a cluster of 3 nodes, with iSCSI shared storage. Then add the VM:100 in HA group. All is ok: root@pve:~# ha-manager status quorum OK master pve (active, Thu Dec 17 22:59:03 2015) lrm pve (active, Thu Dec 17 22:59:04 2015) lrm pve2 (active, Thu Dec 17 22:59:03 2015) lrm pve3...

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE and Proxmox Mail Gateway. We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get your own in 60 seconds.

Buy now!