Thanks for the reply Chris. I don't really need the isolation as this is just an experiment for home use but what I don't understand is why I allocated 512M of swap but the container "sees" 4G. Also, I'm not too familiar with namespaces :confused:
Thanks
Hi all,
I'm experimenting with kasm and I want to install it on a container. I created a test container and added 1G swap but:
alpine-privileged:~# free -h
total used free shared buff/cache available
Mem: 31.3G 27.2G 4.1G 50.1M...
I've just fixed this by changiong to croups2..
https://forum.proxmox.com/threads/pve-7-0-lxc-intel-quick-sync-passtrough-not-working-anymore.92025/
Thanks
Hi all,
I'm trying to share a GPU with a Debian Bullseye (11) container. I installed the nvidia driver using NVIDIA-Linux-x86_64-390.144.run on the proxmox host and then on the container.
Host:
nvidia-smi
Sat Oct 30 22:27:21 2021...
Hi all,
I've setup a simple test of pbs. The hardware is modest but there is only one vm koozali SME server to backup. The promox pve host has 6GB RAM and 4 is given to the vm. I did an initial full backup with the machine powered off which took several hours. I've scheduled a daily snapshot @...
Sorry about thread necromancy but...
I just had the same problem with a Dell Vostro using the same ethernet interface type. I solved it by installing with another ethernet card then manually editing my network config:
auto lo
iface lo inet loopback
iface enp2s0 inet manual
#iface enp1s0f0...
Hi,
Anyone able to clarify that if I enable the firewall / manage portforwarding from the gui that my network configuration will or won't be altered by proxmox?
Thanks
Hi,
I'm trying to setup a Proxmox VE host connected to one of my routers NOT NATed and with the following:
Proxmox host, gui, ssh etc. on a management VLAN (say 5) only reachable from an IP list
Public IP NATed to guests with port forwarding to services, again only reachable from an IP list...
Hi all, I realise this is a long shot but I'll ask anyway.
Is anyone running virtualbox inside a container in proxmox? What I'm trying to achieve is a headless GNS3 server (x86 devices only) running as a proxmox guest. I also realise that I might break my proxmox server and this is...
Hi all,
I'm trying to add UPS support to my 2 node HA cluster which is still in the testing stage. So far, I've got a a third machine connected to a shared UPS running apcupsd with the two proxmox cluster members connecting to the third machine.
So far I've tested that when power fails, a...
Hi all,
I'm trying again to setup a 2 node HA cluster, my setup is 2 identical nodes each with a fresh 3.4 install with:
1 x 60GB SSD for proxmox and 1 x 1TB drive for DRBD
3 x 1G NICs, (one bond0 / balnce-rr) for DRBD network
1 x 10M iSCSI target on an ubuntu host for quroum disk
Fencing is by...
Hi all,
I'm building a two node HA cluster and while testing I've noticed that the output of clustat never changes while my iscsi quorum disk is being rebooted:
Member Name ID Status ------ ---- ---- ------
pve1...
Hi all,
I'm trying to setup a two node high availability cluster and so far everything seems ok. The trouble is that when I test fencing with: fence_node NODENAME -vv it is successful but I have trouble re-adding the fenced node back into the cluster. I'm fencing using a HP 1910-16G switch...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.