Recent content by milew

boot from iso and try repair system. run fsck, repair boot problems, chceck zfs and others

Try boot from install iso. Debug mode install.

Sure, you understand this correctly. But. Can your Windows handle such disk load coming from all virtual machines. If the machine with disks gets damaged, how will you deal with that?

How much memory does have host? and show your vm-s configuration

Test When you add new VM on PROX2, what is the numer new VM?

Resource Pool is on Path: Datacenter/Permissions/Pools it is group of resources for set permissions. You global_thinpool is a storage. You use them when you configure disk on "Disks" tab.

Mar 23 18:37:31 proxmox pvestatd[916]: unable to activate storage 'storage' - directory is expected to be a mount point but is not mounted: '/mnt/pve/storage' Do you have this directory on /mnt/pve/storage ?

Your proxmox don-t know where is address 192.168.2.124 proxmox tray to use gateway 192.168.2.1 but gateway is out of range it address 192.168.1.1-192.168.1.64

masz miszmasz w adresach sieciowych na oknach maska 255.255.252.0 nie jest 26-bitowa, jest 22-bitowa, a adresy zakresów to Min.hosta: 192.168.0.1 HostMax: 192.168.3.254 na promoxie masz 255.255.255.192, jest to 26-bitowy adres, a zakres adresów to Min. Host: 192.168.1.1 HostMax: 192.168.1.62

how did you solve the problem

Take a look at this forum thread https://github.com/virtio-win/kvm-guest-drivers-windows/issues/756 It looks like something similar to your problem.

Show yor VM-s configuration. Do you have enable virtio drivers on VM-s? Have you checked your disk temperatures? Show smartctl -x /dev/your_device

You also need to have some sas controller. The expander only does branching to connect more sas drives. Look at this https://www.youtube.com/watch?v=EjFouPv6K-o

Do you have any SAS controller card? Your drivers show lsblk command.

try smartctl -x /dev/sdb