Recent content by MH_MUC

Falls jemand auf diesen Thread stoßen sollte: Für den nachträglich über die Proxmox-GUI angelegten "data-pool" war in /etc/pve/storage.cfg das "sparse"-value nicht auf 1. Dadurch habe ich bei dem Pool versehentlich auf thin-provisioning verzichtet. Offenbar führt das dazu, dass für das Volume...

Hi Fabian, danke für den TIpp. Ich muss mich an den Thread noch einmal dranhängen, nachdem ich neulich ein größeres Problem hatte, das sogar zu Dataloss führte (vgl. https://forum.proxmox.com/threads/crash-with-data-loss-in-a-2node-cluster.139660/) Ich wollte mir gerade ein Script bauen, das...

Okay was ist dann ein guter Weg um eine Warnung zu generieren, wenn der Speicherplatz eng wird? Das Avail ist ja immer in wechselnden Einheiten angegeben.... Wollte das gerade basteln nachdem ich kürzlich krasse Probleme hatte mit einem Server.

Hi everyone, I have a problem and I hope that anyone knows how to prevent that in the future. I am running a two-node cluster with zfs-replication and HA both with ZFS both running Kernel Linux 5.15.131-2-pve #1 SMP PVE 5.15.131-3 pve-manager/7.4-17 Both servers have local-zfs (rpool)...

I had the same issue last night on ubuntu 22 with agent version 1:6.2+dfsg-2ubuntu6.15

I have a SAMSUNG MZVL21T0HCLR-00B00. I don't find the FW on the Samsung page. Does anyone know where to get the firmware for linux-install? Thanks

Thank you so much. For future readers: The correct command is "qm disk rescan". qm disk rescan rescan volumes... VM 103 add unreferenced volume 'data-pool:vm-103-disk-0' as 'unused0' to config Thereafter I was able to remove the disk and the hardware-tab of the vm and the migration is working...

Hi, I am running a two node cluster with several VMs with ZFS. I am using storage replication in short intervals which seems to be working fine. I was testing a node failure with if up down and a sleep command. I only had one VM103 on the failing node during the test. The VM migrated to the...

Actually I solved it myself. It is hard to find out which server is causing the issue. I had this errormessage: node 'server20': Importing cluster certificate and key node 'server20': pk12util: PKCS12 IMPORT SUCCESSFUL pk12util: PKCS12 decode import bags failed...

Thank you for the reply. I installed the packages on the new nodes. However when trying to add the qdevice again it fails as quoted in my last quote on my first post. Any idea? I think I have to manually remove the remains of the qdevice as I failed to remove it before adding the new nodes...

Hi, I am running a two node cluster with qdevice. I want to replace the existing servers by 2 new ones so I added the 2 new machines to the cluster to migrate the CTs/VMs and to remove the existing ones afterwards. I noticed that the qdevice wasn't shown in the pvecm status of the new servers...

The old disk has the exact same layout as the new one as I copied the partition table as described in the manual. Actually I got it solved now by ordering a kvm to make sure the server stays up and running. The server wasn't booted in UEFI-Mode for whatever reason. So I just booted in UEFI mode...

Hi,. Thank you for the quick reply. The server is pretty old. I don't think the BIOS is supporting uefi. Besides it is in a Datacenter so it is kind of hard to change bios settings without an urgent need. Maybe I have to reconfigure the existing drive. I'll have to check when the server was...

Hi, I have a server running pv 7.3 with a zfs raid1. I had to replace one disk. I followed the https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#_zfs_administration guide for replacing a bootable disk. efibootmgr -v EFI variables are not supported on this system. My problem: After...

Hi, thank you very much for the reply. I have the proxmox-book, but the chapter doesn't contain anything, that one wouldn't find in your wiki. I think the solution would be to create a VM with pfsense as described somewhere here in the forums. This seems to be a challenge if combined with HA...