Recent content by Martini2

I only tried to override the profiles. Will try override the vm.

@zenowl77 Hello, are you able to use the override_profiles with your setup? I run proxmox 9, with a 1060 6GB gpu, 18.4 driver on host and guest. All working but without overrides, so frame rate is limited to 45fps or the resolution is 1280x0124. It worked fine on the 6.8 kernel with 16.5...

Hello i need some advice which gpu to buy for my home server running proxmox 8.x. The supermicro X10SRi-F has this pcie slots 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x4 (in x8 slot), 2x PCI-E 3.0 x8, 1x PCI-E 2.0 x4 (in x8 slot), 1x PCI-E 2.0 x2 (in x8 slot)...

Looks like i will have to accept the high power consumption. When i want a low maintenance machine it has to be server grade hardware. I will look for a used supermicro machine on ebay.de. Thank you for the help.

How about this workstation? Workstation S 128GB RAM | Intel 8 Kerner | 2 TB NVME | NVIDIA QUADRO | OFFICE PC Would this be more energy effective? Do the mentioned T730 and T620 machines have a lower power consumption than the supermicro machine? Would a ryzen 5900x have a much lower idle power...

Would this be a usable device? Supermicro Rackserver 2HE 2x E5-2640V2 128GB 8x 16GB RAM 2xPSU Ohne Festplatten I would put the mainboard in my old server tower and add low noise fans to the cpu coolers so it should be more silent. Will proxmox run on this?

Sorry, forgot to mention that i am working next to the server so it should also be very quiet. But maybe the rack versions can be modified to be quiet too. I will take a look at ebay.de for some used servers.

Hi, i have a homeserver running proxmox with the hardware reaching the limits of 32GB ram on a zfs filesystem. My idea is to buy a new board, processor and ram and swap it with my actual board. Then connect my two x4 raidcards with its ssds, the boot ssd, two big harddisks and some usb...

Hello, i have a problem with one zfs pool in this configuration zpool2 mirror-0 ata-Samsung_SSD_870_EVO_1TB ata-Samsung_SSD_860_EVO_1TB mirror-1 ata-Samsung_SSD_860_EVO_1TB ata-Samsung_SSD_860_EVO_1TB where the first ssd fails regulary and the pool gets degraded. This are the last few...

@Dunuin ;) i just have read that. But why is this better than rsync?

@UdoB Sorry, i missunderstand your 'single drive vdev' statement. I will try this. Redundancy would be great but i would need at last two additional 18TB drives and the system is allready at max with its 32GB ram. Arc uses 15,6GB of 15,6GB, and the hit ratio is at 76%. I don't think it can...

my pool has two 8TB drives, no mirror. It's just a bunch of disks. I need to replace them with bigger ones. pool: zpool3 state: ONLINE scan: scrub repaired 0B in 1 days 00:14:28 with 0 errors on Mon Jan 10 00:38:32 2022 config: NAME STATE READ...

Hello i need to replace a 'single disk' pool containing two hdds with another one, but with bigger drives. Due to ram shortage i need to remove the hdds of the old pool from the system. Is it better to make a new 'single disk' pool of the bigger drives, recreate the structure of the old pool and...

this is the shortened output of arc_summary ZFS Subsystem Report Tue Feb 01 17:16:54 2022 Linux 5.4.162-1-pve 2.0.7-pve1 Machine: home (x86_64) 2.0.7-pve1 ARC status...

Hello, i want to add another storage pool to the proxmox server which now has 32GB ram and ~20TB of diskspace using zfs. The ram consumption is ~24GB with max peeks at 29GB. I will be adding 36TB of diskspace on zfs and assume that the system may become unusable due to lack of ram. Do i need to...