Recent content by MarcinTD

and the 2nd part: Disk /dev/mapper/pve1-vm--122--disk--0: 32 GiB, 34359738368 bytes, 67108864 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0xb8674a68...

root@proxmox:~# fdisk -l GPT PMBR size mismatch (936640511 != 1873281023) will be corrected by write. The backup GPT table is not on the end of the device. Disk /dev/sda: 893.25 GiB, 959119884288 bytes, 1873281024 sectors Disk model: PERC H710P Units: sectors of 1 * 512 = 512 bytes Sector size...

fdisk -l attach in next posts (its too big)

ok, can you advise me what I could safely remove?

What Proxmox command results would you like to see?

For some reason, proxmox is eating up almost my entire disk and I can't figure out what is taking up so much. I would like to ask you about files from which locations I can safely delete to free up space on the disk where PVE is installed? Moreover, is apt autoremove completely safe and will...

I want to lighten the disk a bit because its current usage is: 95.44% (441.34 GB out of 462.44 GB) Unfortunately I can't locate what is taking up so much space. Previously the occupied space was about 300 GB. I understand that apt clean is absolutely safe and I should run it from root@proxmox...

Hi, can I safely delete all the contents of this path for PVE? root@proxmox:/var/cache/apt/archives# Also, in what other locations can I completely delete all files to free up a lot of space on local disk?

I used a pendrive for over 3 years and it worked very well. Is it not possible to use a pendrive as a disk with the system in PBS 3.2? If so, can I ask for advice on how I could set up the HPE server to make it possible? Ps. The system crashed during the last upgrade (the update itself from...

Server: HPE ProLiant MicroServer Gen 10 Plus System to install: Proxmox Backup Server The disk on which the PBS is to be located: 32 GB USB pendrive And a question... How to set the bios in HPE to enable you to select a pendrive during installation as the disk on which PBS will be installed...

So I understand that all accounts with PVE login authorization cannot have SSH access, right? All accounts except root have PVE. So if anyone already has an account with PVE authorization, I simply have to delete it and create a new one with PAM authorization, right? Unless I can somehow...

How do I give regular users access to proxmox via ssh? I wouldn't want such a user to have administrative rights. I only want these users to have access to proxmox via the console, but without elevating their privileges to root-like. Thanks in advance for your help

Is there any way to fix it or just replace the disk? This message was generated by the smartd daemon running on: host name: proxmox DNS domain: xyz.xyz The following warning/error was logged by the smartd daemon: Device: /dev/bus/0 [megaraid_disk_09], SMART Failure: HARDWARE IMPENDING FAILURE...

The problem is that I was using apt dist-upgrade earlier and it already updated PBS to version 3.

Hi Today I installed the PBS update to version 3.2-7 from 2.4. When executing the apt upgrade or apt update command from CLI, what repositories should I currently have in /etc/apt/sources.list ?? Currently I have: deb http://ftp.pl.debian.org/debian bookworm main contrib deb...