Recent content by kladze

my issue was that firewall was disabled on hardware nic, on the VM! so on short... you have to ensure that firewall is enabled 4 places in total.... datacenter node over all vm fw vm, hardware nic! (enabled by default) - i had removed mine back in the day when creating the vm

Hi all, i'm facing some really basic issues related to firewall i think... i'm in the middle of trying to build up a firewall, but before even going any deeper i need to get basic things working and tested. So here a basic example of things i can't the firewall to work with.... - DATACENTER...

while that may be true... you are just forgetting that 3770 cpu is running at 3.4 ghz while the xeon is 1ghz lower! (2.4ghz) - if i took the xeon to 3.4ghz aswell, it would be completely different

running with server 2022, cpu is running host - sure it has some years on its back, no worries and im fully well aware of that. but even if you look at the xeon scaleable cpu's bronze,silver,gold,plat... 6100 and 6200 series both are still 14nm.. yes im aware its the 14nm+++++++++++ refinements...

not really sure where on earth you are getting those 13 years from..

core isolation is disabled by default, and hyper v role is not enabled.

im actually running windows server 2022 (4 of them) but maybe this still applies?

Hi all, i'm all to new proxmox so bare with me with my very limited knowlegde. I have recently installed proxmox 8 on my server dell r730 cpu: 2x 2680v4 xeon (14 core/28 threads each) 320gb ecc ram root disk, 1 disk zfs - Intel D3-S4610 Series - model: SSDSC2KG480G8 ( purely for proxmox ) 1x...

Thanks! - Is rcu_nocbs=0-15 the only required parameter or is the parameter processor.max_cstate=1 also needed?

How do you add the kernel parameter? - having the exact same issues with my ryzen 1700

Hello, Im having a problem after re-installation proxmox... I went from 1.5 to 2.2 - I did a fresh install... the IPMI in my server is no longer "working" when the OS is about to load up... Here is what happends.. 1. Power up server - OK 2. Some BIOS POST information - OK 3. When going to...

Hello, I had a proxmox installation of 1.5 - but after reinstalling/opgrading to 2.2 the IPMI in my server is not "working" anymore... After BIOS POST the IPMI just shows a black screen when loading the OS... And it wont even boot.. But if I load up the proxmox 2.2 CD and type "pveboot" when...