jsterr's latest activity
-
jsterr replied to the thread Questions about the dynamic CRS.@dakralex are there plans or ideas about some additions for usecases like: * Company has a multi-room setup with for example 2 nodes in room1 and 2 nodes in room2 and a quorum node in room 3 * Theres a ha node affinity rule for room1 (node... -
For erasure coding with k=8 and m=3 you need at least 12 nodes.
-
I think you're asking the wrong question. what is the workload in vm count and minimum required iops/vm? how much capacity do you need? ceph works fine with hard drives. its just slow.
-
jsterr reacted to SteveITS's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with
Like.
Yes it could be clearer, but "at time of writing (2026-01-09) only available on the test repo"...they're there on enterprise. -
jsterr replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.I personally did not have any issue with it. Even before "stable" was announced but I also do NOT use the telementry-module.
-
don't use consumer ssd with ceph or zfs. you need PLP to handle sync write
-
jsterr replied to the thread [TUTORIAL] Creating 2 node Proxmox VE cluster with StorMagic software defined storage.https://www.thomas-krenn.com/en/products/storage-systems/stormagic-virtual-storage/stormagic-licenses (dont wanna sell just inform - pve-ceph wins for me :-))
-
jsterr reacted to guruevi's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
From your writing, you clearly do not understand what PVE is, what qm does and to read through and disentangle it all seems like a waste of time. But qm is just a client to the PVE API (it simplifies QEMU only to a few relevant commands and...
-
This is absolutely needed and has to be very precise. I.e. which exact metric is used for both CPU and Memory "loads": CPU load vs CPU usage vs CPU pressure, Mem usage vs Mem pressure. Currently testing CRS in lab and it seems to allow a node to...
-
Hi! In more detail, each node's current cpu and memory usage is normalized with its own capacity (i.e. cpu_load = current_cpu / max_cpu and memory_load = current_memory / max_memory), where the node's current load is then a equal-weighted...
-
jsterr replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Are there any differences regarding kernel on those nodes? the ones that work and the one that does not? Do you have any errors on node-site regarding the disks (not ceph related) but storage-device related (host bus adapter etc.)?
-
jsterr reacted to leesteken's post in the thread [SOLVED] kernel update fail 6.14 to 7.0 no space left on device with Like.
Don't run 'apt upgrade' as it might not pull in all dependencies; use the official instructions instead: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#system_software_updates And here is a (another) recent thread where the same problem...
-
jsterr replied to the thread [SOLVED] kernel update fail 6.14 to 7.0 no space left on device.what about proxmox-boot-tool kernel remove? root@pveneo:~# proxmox-boot-tool kernel E: subcommand is mandatory for 'kernel'. /usr/sbin/proxmox-boot-tool kernel <add|remove> <kernel-version> /usr/sbin/proxmox-boot-tool kernel pin...
-
jsterr replied to the thread [SOLVED] kernel update fail 6.14 to 7.0 no space left on device.is a apt autoremove not enough to fix this? did the job on my site a few weeks ago.
-
jsterr reacted to fabian's post in the thread Cluster not quorate - extending auth key lifetime! with Like.
could you double check and post your network configuration/setup, including the switch config? in particular of the two "problematic" nodes? this looks like a network misconfiguration problem, though the logs don't give a clear indication *what*...
-
jsterr reacted to gyptazy's post in the thread Der Proxday 2026 in Deutschland, Mönchengladbach with Like.
Hey zusammen, gerne möchte ich (einige kennen mich sicherlich bereits von ProxLB, PegaProx und den Ansible Modulen für PVE) euch auf das Community-Event Proxday 2026 aufmerksam machen, der von der credativ GmbH veranstaltet wird. Das Konzept ist...
-
jsterr reacted to THE_BIG_ONE's post in the thread Q35 v11.0 causes extreme corruption on many VMs Linux/BSD/Windows (STOP 0x8007025d) with Like.
I have performed 6 successful installs across 5 different Proxmox PCs with this morning's pve-qemu-kvm v11.0.0-3 using qcow2 with SSD + Trim/Discard enabled and no seen issues. I am currently now performing 3x in-place repair / upgrades across 3x...
-
jsterr replied to the thread Proxmox Virtual Environment 9.2 available!.Thanks! Been seeing the features the last two weeks already, now they are official! Thanks for your work - love the new load balancing!