Recent content by James Richmond

It makes me wonder if the refresh is really working. I mean if there are updates out there to do why is it not picking it up. Any thoughts on that?

Ok, my kernel version is now the same across the board but the "monitor" did not update to the latest. Still says it is 14.2.5 and the rest (other 2) are 14.2.8. Thanks again for your help with this

Ok, then yes I did do the refresh before doing the updates and I also tried the CLI way as well running apt update & apt dist-upgrade. At that moment there was nothing to update (mind you this was yesterday). I just tried it again and there are updates to do on that server. So you might be right...

No, I did not run a "Refresh" on all nodes before the update. To be honest I am not sure even how to do that (what the command is to do a refresh). Yes all sources.list and sources.list.d are the same on all 3 servers.

HI all, I am hoping you can help me with an issue I am having. First... sorry if this is posted elsewhere. I tried to do my research. I did updates to my 3 node cluster the other day and now the Monitor version are not the same and the kernel is not the same on just one of the server (all 3...

2019-02-05 12:27:57.879006 mon.pve1 mon.0 10.10.10.1:6789/0 192680 : cluster [WRN] mon.1 10.10.10.2:6789/0 clock skew 0.22317s > max 0.05s 2019-02-05 12:27:57.879081 mon.pve1 mon.0 10.10.10.1:6789/0 192681 : cluster [WRN] mon.2 10.10.10.3:6789/0 clock skew 0.225808s > max 0.05s 2019-02-05...

I will remove the 143,140, 146 from the server. I added them just to see if it would resolve the issue. With that said I could get to the Proxmox with those IP's even though I was not using them. What about CoroSync and Ceph? I have them on a isolated switch from the rest of the network... but...

Do you need any other information Stoiko?

There we go.

It does. Took a screenshot but it wont upload.

PVE3: root@pve3:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host...

PVE2: root@pve2:~# root@pve2:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128...

PVE1: ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host...

When I am having the issue of not being able to get to the VM gui via vmbr2 I will switch the LAN to use vmbr0 and then change vmbr3 to vmbr0 as well to get it off that 4 port NIC card. Also when using that NIC card I can migrate that VM to any 1 of the 3 servers and it will not work. I have a 4...

Still having the issue. Please someone!!! :D