I have a server installed with the latest prox. It's not top of the line box.
About every 4-5 min. The I/O delay goes up to 50%+ for about 10-20 seconds, then back down again. The server has 16*300 GB sas drives in a raid 10, 32 GB Ram and 16 cores. We tried swapping out the raid card - no...
Could be a number of things.
Did you check the logs to see if it's something like no CIFS support installed on the proxmox box?
Did you login to the Prox server itself and try mounting the SMB share directly? Does it mount?
What we did a while back was replace a Windows server with...
That server probably has a Perc 5i or 6i. It has an LSI chip and will be much faster than individual disks.
Setup raid 0 on the controller if you don't care about the data, but I would use raid 10. Saves you from reinstalling if a disk blows up. I have the exact same machine with the same...
I compiled it and it works fine. You will need to install the kernel source and dev tools to compile it.apt-get update && apt-get install build-essential libtool linux-source linux-kernel-headersDownload the driver source from...
That looks like a Promise controller chip on that card you returned. That is software raid for sure. Take a look at ebay for cheap 3ware cards. They are hardware raid.http://www.ebay.ca/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=3ware+9500&_sacat=See-All-Categories
Run "apt-get update" first, then run apt-get -f install to fix the install issues.You can tune a few settings to get a little better performance. Try setting the fs readahead using blockdev --setra 4096 /dev/sd?.You cannot expect high performance from slower sata disks with no raid controller...
When installing squeeze, the installer asks if you want to load the missing firmware from external storage (USB Stick). If you bypass that, the firmware has to be loaded manually. It's a pain to do later. My advice is the reinstall and load the firmware from a USB stick. I have done this on IBM...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.