FuriousRage's latest activity
-
FFuriousRage replied to the thread [SOLVED] Seperate VLAN for management, oddities.I found out the reason. I had to do mkdir /root/nodes && mv /etc/pve/nodes/pve /root/nodes then i could rejoin the cluster on the new ip
-
FFuriousRage replied to the thread [SOLVED] Seperate VLAN for management, oddities.Ah well, decided to try remove the cluster and have them rejoin. Backed up the 3 lxc's and deleted the guests (kept backups) did the whole systemctl stop pve-clustersystemctl stop pve-cluster systemctl stop corosync pmxcfs -l rm...
-
FFuriousRage posted the thread [SOLVED] Seperate VLAN for management, oddities in Proxmox VE: Networking and Firewall.Hi. I have setup vlan 90 on my unify for management. I setup a vmbr and a vlan on pve network, with vlan 90. in both servers console i can ping all vlan90 ip's i currently have. --- However, since i didnt do vlan before i clustered them i...
-
FFuriousRage replied to the thread [SOLVED] Created cluster, one node storage gone.Thanks, seems i now could restored the vm to its correct location :D
-
FFuriousRage replied to the thread [SOLVED] Created cluster, one node storage gone.tried: pvesm --disable false local pvesm --disable false /var/lib/vz the "--disable" doesnt seem to exist. 10:33:19 root@pve2 dump → pvesm --disable false local ERROR: unknown command 'pvesm --disable' USAGE: pvesm <COMMAND> [ARGS] [OPTIONS]
-
FFuriousRage replied to the thread [SOLVED] Created cluster, one node storage gone.I didn't disable that one, afaik, i never edited the storage.cfg, i just connected the two and it was disabled some how. Do i just need to remove "disable" and the pve will find it, or is there a better command to re-enable it?
-
FFuriousRage replied to the thread [SOLVED] Created cluster, one node storage gone.That path (/var/lib/vz) seems to exist on both nodes, different sub-dirs in it thought.
-
FFuriousRage replied to the thread [SOLVED] Created cluster, one node storage gone.Yeah, but the local for pve2 isnt available anymore, where as on the pve (one) all its storage is available. I disabled/set pve1 only for the btrfs storages because it was annoying to see the unavailable one on pve2, since the btrfs storages...
-
FFuriousRage replied to the thread [SOLVED] Created cluster, one node storage gone.08:45:37 root@pve2 dump → cat /etc/pve/storage.cfg dir: local disable path /var/lib/vz content iso,vztmpl,backup btrfs: local-btrfs path /var/lib/pve/local-btrfs content backup,rootdir,import,iso,vztmpl,images nodes pve...
-
FFuriousRage posted the thread [SOLVED] Created cluster, one node storage gone in Proxmox VE: Installation and configuration.Hi. I have 2 seperate pve's joined them in a cluster. At first i couldnt because i already had made a vm in the joining one. So i made a backup of it and removed the vm. then i could join it. But now, the joining pve vm/iso/etc storage is no...
-
-
FFuriousRage replied to the thread [SOLVED] /var/ read-only.Tested a mechanical drive. Same errors. Some more websearching, i tested intel_iommu=off in grub config, updated grub and rebooted. seems like the ssd also works, no screaming red dmesg outputs after the hdparm tests ive done So it seems it was...
-
FFuriousRage replied to the thread [SOLVED] /var/ read-only.Switched sata cable to a different one, switched port on mainboard. Have now run for i in {1..15}; do hdparm --offset 50 -t /dev/sda; done quite many times with different offsets. dmesg screams: [ 733.437796] dmar_fault: 2401198 callbacks...
-
FFuriousRage replied to the thread [SOLVED] /var/ read-only.Did: smartctl -t short /dev/sda smartctl -t long /dev/sda smartctl -t conveyance /dev/sda smartctl -t select,123+345 /dev/sda smartctl -H /dev/sda === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result...
-
FFuriousRage posted the thread [SOLVED] /var/ read-only in Proxmox VE: Installation and configuration.I just installed 9.0-1 on an older computer (i5 from 2014), ddr3-era. 9.2 couldnt install. i managed to update to pve-manager/9.2.2/b9984c6d90a4bd80 (running kernel: 7.0.2-6-pve) --- How ever, when i try do some stuff, /var/ seems to be...
