Recent content by FernandoT

OK, so it has something to do with the USB SSD I am using. Installing everything on a plain USB 3GB stick worked fine, this was sufficient to test my Theory of the controller being snatched by the VM while PROXMOX is also on a disk on the same controller. Now the pass-trough went fine. Even with...

Sadly this did not do the trick, anybody other ideas?

Hi, Thanx for the tip, could be indeed that de USB port is too slow etc. Will look into that but in the meantime if someone knows how to do this all info is welcome.

Hi Everybody, I have been running Proxmox for more the a year now on my HPE Microserver Gen10 Plus and it is working great! I Installed the OS on a 500GB SSD running on on of the USB 3.X ports of the GEN10 Plus and the four internaldrives are passed trough to a VM running a NAS. Then I share...

Oops, posted this in the wrong section. Not sure how to delete it.

Hi Everybody, I have been running Proxmox for more the a year now on my HPE Microserver Gen10 Plus and it is working great! I Installed the OS on a 500GB SSD running on on of the USB 3.X ports of the GEN10 Plus and the four internaldrives are passed trough to a VM running a NAS. Then I share...

Ok Further digging and research point out the error messages I receive are just cosmetic. I think I have to search the root cause in the probable fact that not all volumes are being mounted and therefor no modules etc. are being loaded. The thing is why is this the case as it loads a part of...

Hi Everybody, In my search for a solution to my problem I stumbled upon this article. I have a HPE Microserver GEN10 Plus running Proxmox 6.4 flawlessly from a USB ssd and with the PCI SATA controller and drives passed through to a XPENLOGY vm. This works great, I share the storage as NFS to...