dcsapak's latest activity
-
dcsapak replied to the thread VFIO: Firmware has requested this device have a 1:1 IOMMU mapping.HI, can you post the iommu groups, the vm config and the output of dmesg here? in general the error: is a mainboard/firmware limitation that the linux kernel enforces, so to really fix it, you'd have to either change some bios setting or ask... -
dcsapak replied to the thread MAM Attribute 800: Illegal Request.hi, nachdem sich bis jetzt noch niemand dem angenommen hat, hab ich jetzt einfach mal den patch geschickt (ist aber noch nicht reviewed/applied): https://lore.proxmox.com/pbs-devel/20260702123910.3975440-1-d.csapak@proxmox.com/T/#u
-
dcsapak replied to the thread decode element status failed - failed to fill whole buffer.what exactly is the bug here? can you elaborate? the output you posted looks normal...
-
dcsapak replied to the thread Configuring an LXC container cloned from a template via API.no AFAIK currently not, but it's a very sensible feature request ;)
-
dcsapak replied to the thread Windows VM flickers after few seconds.then it sounds like it to be a guest driver issue? can you post the vm config and what kind of hardware you have?
-
dcsapak replied to the thread Windows VM flickers after few seconds.Hi, what browser and version do you use? (looks more like a client issue to me)
-
dcsapak replied to the thread [SOLVED] spice the journey of an unitiated pleb..hi, sorry for the late answer. did you make sure to also open the 3128 port? can the client reach the correct ip directly? (192.168.1.122 in this case)? you could also try opening the file with remote-viewers 'verbose' and/or 'debug' output...
-
dcsapak replied to the thread Configuring an LXC container cloned from a template via API.hi, You only mentioned ssh-key in the OP, and this can be done on container creation but not later (I misremembered that, sorry) there is no generic push/exec for containers via the api (yet), but feel free to open an enhancement request on our...
-
dcsapak replied to the thread Configuring an LXC container cloned from a template via API.this is not possible with a single api call. you have to clone first and then configure the options you want to set.
-
dcsapak replied to the thread RTX 5060 Ti passthrough hard crashes Proxmox host on VM start.one question: how do you determine it's a hard lockup ? it being pingable would indicate there is still some stuff happening. did you already try to attach a physical display and keyboard to it to see what the condition the host is in?
-
dcsapak replied to the thread Remove attached ISO.i guess it's not checked because such a check will always be incomplete. to check every vm we'd have to iterate over all vm configs on all nodes, but while the check is running nobody is prevented to add the iso to a vm again. alternatively the...
-
dcsapak replied to the thread Intel ARC Passthrough to linux VM works, Sata HBA passthrough to Truenas Works, running both at the same time crashes host.Hi, can you share the journal and the vm config?
-
dcsapak replied to the thread [iOS App] Unable to login with OpenID.product pve and component 'app (flutter gui)' is the correct one. the description says android, but the ios app is also the same flutter project
-
dcsapak replied to the thread [iOS App] Unable to login with OpenID.feature requests can be made on our bugzilla: https://bugzilla.proxmox.com
-
dcsapak replied to the thread PMG 9.0.2 New Mobile Quarantine Site Actions.yes i can reproduce that, i'll look into it EDIT: sent a patch for it, wasn't that much change: https://lore.proxmox.com/pmg-devel/20260617105617.2351595-1-d.csapak@proxmox.com/T/#u
-
dcsapak replied to the thread PBS and iSCSI Tape drive.ok what error do you get if you try to use it? (the status command looks fine for a drive with no tape inserted)
-
dcsapak replied to the thread URIBL matched content in Logfile.i think this is not possible in the syslog, but if the mail is in the quarantine or delivered, you should be able to see it in the mail headers
-
dcsapak replied to the thread PBS and iSCSI Tape drive.can you send the journal too? and are you sure this is the right host? i can't see any tape drive at all in the log (or of IBM/Ultrium) ?
-
dcsapak replied to the thread PBS and iSCSI Tape drive.it seems pbs is not seeing the drive at all? can you post the output of 'dmesg' or 'journalctl -b' ?
-
dcsapak replied to the thread [xterm.js] two usability issues.ok on firefox 151 on wayland (sway here) i can see that the copy action with middle click does not work (in chrome it does) not sure why that is though and if were even able to fix it from our side (might be a firefox issue) could you please...