dcsapak's latest activity
-
dcsapak replied to the thread [xterm.js] two usability issues.i can't reproduce this, middle click in xtermjs works as expected. Though this is mostly a client issue (browser/os) not directly an xtermjs one... i guess you use the guest with serial terminal configured so xtermjs works? if yes, you have to... -
We are excited to announce the release of Proxmox Mail Gateway 9.1! This release is based on Debian 13.5 "Trixie" and ships the Linux kernel 7.0 as the new stable default. It includes the latest versions of ZFS 2.4, PostgreSQL 17, SpamAssassin...
-
dcsapak replied to the thread PBS and iSCSI Tape drive.what is the output of the pbs commands? what is the output of proxmox-tape status --drive <drive> ?
-
dcsapak replied to the thread Memtest as default rEFInd option after upgrade to PVE 9.2.it seems there was supposed to be an image there, but it's not. usually pve is booted with grub, so how did you install pve on that machine?
-
dcsapak replied to the thread All VM can't accessible after kernel UPdate of the nodes?.sadly, without that, i can't really help. if you get around to it, just post it here, then i can take a loook
-
dcsapak replied to the thread USB microphone passthrough: recognized, but does not work.hi, this is probably not easy to debug, but one thing that could help is to try the microphone with a linux guest (if it works at all on linux). If it also does not work there the journal from the host and the guest might be helpful to see what...
-
dcsapak replied to the thread All VM can't accessible after kernel UPdate of the nodes?.you have to boot the server with the not working kernel and run the commands again
-
dcsapak replied to the thread All VM can't accessible after kernel UPdate of the nodes?.can you post the journal/dmesg from both the working and the non working state?
-
dcsapak replied to the thread All VM can't accessible after kernel UPdate of the nodes?.these are still too little facts. how does your setup look like? what do you mean exactly with 'aren't accessible' (not reachable via network?, don't start?) ? the logs from the two boots would be interesting but the most important part was...
-
dcsapak replied to the thread LXC container migration using Proxmox Datacenter Manager.can you post the container config? (pct config ID on the pve node)
-
dcsapak replied to the thread Tried PDM for the first time (version 1.1) - had issues.hi, AFAIK there is no special setup done on the first boot, so just let it boot and shutdown should have the same effect as directly shutting down. adding a shutdown button at the end of the installation is IMO a rather niche use case. you...
-
dcsapak replied to the thread LXC container migration using Proxmox Datacenter Manager.what is the error you get? it might be that currently not all source storage type -> target storage type migrations are supported, this must be implemented on the pve side
-
dcsapak replied to the thread LXC Boot and vzdump Failures on Ceph RBD after Upgrade: fsconfig() failed ... Can't lookup blockdev (Exit Code 32).i did try to reproduce but couldn't, more information about your setup (ct/ceph config etc.) would be useful. does this persist after you reboot your nodes?
-
dcsapak replied to the thread Opentelemetry metrics format..no, AFAIK the open telemetry plugin in PVE only supports json currently.
-
dcsapak replied to the thread Intel Arc Pro B50 SR-VIO not working.can you post the full vm config? (qm config ID) and which driver did you try to install exactly (on which windows version?) EDIT: also the mapping config would be interesting
-
dcsapak replied to the thread Proxmox 9.1.7 RTX 6000 Pro drops off PCI bus.yes that is possible... did you try with 'pcie_aspm=off' on the kernel commandline? alternatively you could try to set 'vfio-pci.disable_idle_d3=1' to prevent the card from going to d3 state in idle with the vfio-pci driver
-
dcsapak replied to the thread Intel Arc Pro B50 SR-VIO not working.hi, first there is an easier way to get to the sysfs path: /sys/bus/pci/devices/<id>/ so in your case /sys/bus/pci/devices/0000:04:00.0/ could you try with that path? echo 2 > /sys/bus/pci/devices/0000:04:00.0/sriov_numvfs and if it...
-
dcsapak replied to the thread Backup file restore.can you check the file-restore logs under /var/log/proxmox-backup/file-restore (on the Proxmox VE host)? this message appears usually when there is a filesystem in use in the guest that is not readable with a linux kernel also, please update...
-
dcsapak reacted to whistle's post in the thread Ryzen 7 1700 random hard lockups, clean logs with
Like.
After doing some more research, I found that first gen Ryzen CPUs have a hardware bug where it crashes when transitioning out of the C6 deep sleep state back into active state. The freezing was happening randomly and every time I checked the logs... -
dcsapak replied to the thread Unable to get Arc Pro B50 to function.can you please post the complete journal output from the last boot (journalctl -b) ? maybe we can see more what might be an issue? i have an arc pro b50 here in my workstation and after updating the firmware it works fine