Recent content by Dark18

On the host, I could run the intel driver tools when the drivers were loaded and the passthrough disabled. And also when enabling the passthrough, I could not find any errors on the host. I tried with an already existing Ubuntu VM that used a 2070 Super before. I installed all possible drivers...

I am using Ubuntu 23.04 with kernel 6.2

Well, I found 2 or 3 reports where it worked with some kind of ARC GPU. But they don't have the same issue as I have. I still tried their solutions, like the script from this thread, without success...

I blacklisted blacklist i915 in modprobe.d and according to lspci it is used by vfio-pci. I disabled it in the host UEFI, but it changed nothing, unfortunately.

Hello, I have a proxmox server with an AMD Ryzen 9 5900X and (previously) a RTX 2070 Super for encoding. PCIe passthrough works fine with it. The host itself uses a second GPU (Nvidia Quadro P600). Now I would like to switch to a new Arc A380 (because of av1 support). I already tried the A380...

Yes it works fine. Until I enable datacenter firewall once. After that, disabling the datacenter firewall has no effect and only a reboot restores the communication. As the issue also occurs with no specific ufw and iptables rules set, here is the output with the default rules...

I added the option, enabled the host firewall and then the datacenter firewall and also rebooted. Unfortunately, it didn't change anything. Exactly. Ping does work, but any TCP connections don't. When disabling ufw now, everything works. So I deleted all of my ufw and iptables rules and set...

The file host.fw does not exist. Even if I try to add host based rules, the file is not created while the rules appear in the UI. In the directory, there are only cluster.fw and 10*.fw Proxmox host: 192.168.86.1 (vmbr1), 192.168.99.4 (wg0) VMs: 192.168.86.6, 192.168.86.8 Here is the content...

Hello, I have a proxmox server running 7.4-13. When I try to enable the firewall on datacenter level, all connections to my VMs break and I can't ping them. Even those VMs which have no firewall enabled in VM Firewall and Hardware settings. Also my NFS mount from my TrueNAS VM breaks...

Hat funktioniert, danke ;) Davor aber noch die alte Config sichern mit cp 105.conf 105.conf.alt und in 105.conf die Snapshoteinträge löschen (105 durch die ID ersetzen).

Hallo zusammen, ich habe folgendes Problem: Für einen Gameserver hängt an meinem Server eine extra SSD mit 229 GB nutzbarem Speicher. Es liegt nur die Platte des Gameservers drauf. In Proxmox habe ich sie 65 GB groß gemacht. Aktuell sind 2 Snapshots davon vorhanden, aber auch ohne habe ich das...

Nach einem Reboot scheint jetzt alles zu funktionieren. Danke!

So, kleines Update: Ich habe jetzt die unteren Befehle genutzt (Separate A Node Without Reinstalling), bekomme aber wieder Fehler: root@privserv ~ # systemctl stop pve-cluster root@privserv ~ # systemctl stop corosync root@privserv ~ # pmxcfs -l [main] notice: forcing local mode (although...

Das Problem ist, dass ich diese Befehle nicht nutzen kann: root@privserv ~ # pvecm nodes Cannot initialize CMAP service

Hallo zusammen, ich bin recht neu was Proxmox angeht und habe auf meinem Server gestern aus Neugier ein Cluster hinzugefügt. Nur.. scheint es mir einiges kaputt gemacht zu haben. Nichtmal vorhandene VM's kann ich noch starten. Im Internet habe ich bereits recherchiert, aber keine Lösung...