CycloneB's latest activity
-
CCycloneB reacted to beisser's post in the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with
Like.
i repeat, dont use the test-repo for production. developers state its only for testing-purposes and not for production-use as evidenced by my screenshot from their own wiki. you ignoring this is purely on you and on noone else. you could have run... -
CCycloneB replied to the thread IOMMU/DMAR Regression (PTE Write access) on Alder Lake-P (Ugreen DXP6800 Pro) – 6.17.13-2-pve vs 6.17.9-1-pve.Anyone experience better results on the newer kernels are we all still pinning to the older ones? With that bug report, I got one request for logs, but then silence since.
-
CCycloneB replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.I wish I stayed on pve8 longer. After this issue, I pinned to 6.8.12-20-pve from 6.17.13-2-pve and have been stable since. Sadly, the original issue corrupted my zfs pool during a scrub, so I’ve been slowly restoring/rebuilding things from older...
-
CCycloneB replied to the thread pmxcfs spamming into /var/log/syslog.The log entry was so long I had to split it across two posts b/c of the character limits, which goes to show how excessive this seems!
-
CCycloneB posted the thread pmxcfs spamming into /var/log/syslog in Proxmox VE: Installation and configuration.I see this thread from 2021 and didn't want to necro it in case this is a different issue with the same result. In my syslog, I get dozens of these messages at a time. Is this expected? From the prior thread, it sounded like a coder at some...
-
CCycloneB replied to the thread IOMMU/DMAR Regression (PTE Write access) on Alder Lake-P (Ugreen DXP6800 Pro) – 6.17.13-2-pve vs 6.17.9-1-pve.Sounds VERY familiar, especially once the poster mentioned an impacted SATA Controller.
-
CCycloneB replied to the thread IOMMU/DMAR Regression (PTE Write access) on Alder Lake-P (Ugreen DXP6800 Pro) – 6.17.13-2-pve vs 6.17.9-1-pve.@wuselfaktor , fyi that I submitted https://bugzilla.proxmox.com/show_bug.cgi?id=7505 per a recommendation from @fiona in another thread about a different 6.17 kernel issue. I put a link to this thread in the bug report. Thank you again for your...
-
CCycloneB replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.Just an FYI that since I uninstalled mdadm, I do not have that alert anymore. I sadly fell into another problem, but I've now gotten stable using steps outlined in that thread. I wouldn't be surprised if that problems was contributing to seeing...
-
CCycloneB reacted to Neobin's post in the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9 with Like.
At least, none of those is installed on my PVEs.
-
CCycloneB replied to the thread IOMMU/DMAR Regression (PTE Write access) on Alder Lake-P (Ugreen DXP6800 Pro) – 6.17.13-2-pve vs 6.17.9-1-pve.OMG Thank you! I am seeing the same issue and keep suffering zfs pool corruption the last few days. I just pinned back to 6.8.12-20-pve from 6.17.13-2-pve to see if it helps. I have a Raptor Lake (i5-13500) processor. I will try pinning to the...
-
CCycloneB replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.I don't ever recall explicitly installing mdadm (but I could have just forgotten), but no, I've never used a software raid until I defined the zfs inside TrueNAS. When I do an apt remove mdadm, I do see the following list of packages to be...
-
CCycloneB replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.And the spinners look good too, if I'm reading this right. When I spin up the VM again, I get these messages: Apr 05 18:22:36 <node> kernel: md/raid1:md126: Disk failure on sda1, disabling device.md/raid1:md126: Operation continuing on 2...
-
CCycloneB replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.
-
CCycloneB replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.I removed the startup option on TrueNAS, rebooted the host, and ran smartctl to check for things: nvme0n1 is the boot SSD, so ignoring that drive. So the NVMe look good, right? Spinners in the next post due to character limits.
-
CCycloneB posted the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9 in Proxmox VE: Installation and configuration.I need some help understanding the alert I received today. I'll give some background, but I'll hide it as a spoiler in case the extra detail isn't relevant. Today I received the following alert: DegradedArray event detected on md device...