bbgeek17's latest activity
-
bbgeek17 reacted to aaron's post in the thread HA fencing with softdog vs IPMI watchdog — which one is actually used when both are configured? with
Like.
I recommend to stick with the soft watchdog. It works well and you avoid any issues due to questionable quality of OOBM hardware and software ;) -
bbgeek17 replied to the thread [Solved] After update from 9.1.6 to 9.2.3, Nothing shows under Datacenter.I would review the upgrade logs/output, if still available, for any errors. I would then reboot the server and closely review the logs starting from fresh boot, both journalctl and /var/log/pve/* I would also run: - dpkg -V - apt install debsums...
-
bbgeek17 replied to the thread [Solved] After update from 9.1.6 to 9.2.3, Nothing shows under Datacenter.Hi @ravem0n , welcome to the forum. Have you checked the Console of the browser for errors? Have you previously run any scripts that may have modified the code? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread cannot install applicatipon on Proxmox vm.Hi @cemil.heyderov , welcome to the forum. At the first glance it seems like an installation media problem. There is nothing in the error to suggest that modifying PVE config would help. Cheers Blockbridge : Ultra low latency all-NVME shared...
-
bbgeek17 replied to the thread Windows Failover Cluster.Hi @Malavudeen , welcome to the forum. Is there a particular challenge that you are trying to solve? We've had WSFC running on PVE, in the lab, successfully. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Migrating linked clones - does that go well?.Migration across heterogeneous storage is handled by a client-side process. The client has no awareness of the internal layout or implementation details of the virtual disk - it simply reads logical data blocks. Whether those blocks originate...
-
bbgeek17 replied to the thread Migrating linked clones - does that go well?.Hi @William Edwards , It looks like your new storage is "local" directory type storage. The old one is "ZFS block" type storage. The name changes are not semantic - they are completely different formats. There is also no way for you to...
-
bbgeek17 replied to the thread Storage size for clusters.Right, 69TiB is 75TB, which perhaps is 25x3? But then Op says that they only have 25TB _total_. @Taledo , its all speculation until hard supporting data is provided. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Storage size for clusters.Hi @Taledo, Perhaps adding a few more full page screenshots would help here. Its unclear where this data came from exactly, or how it correlates to your actual hosts. Providing exact CLI metrics data from the hosts would be helpful as well...
-
bbgeek17 replied to the thread Unable to restore VM.One of the questions - when was the chunk corrupted. Perform a test backup that represents your normal workload, then verify it immediately. Also, check "dmesg" output for any disk error indications around the time when you ran previous verify...
-
bbgeek17 replied to the thread canot migrate vm fro a version 8 cluster node to a version 9 node.Hi @muekno, It would help if you can share: pveversion -v qm list qm status qm migrate ID NODE2 Screenshot of the exact state you are looking at. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).Great to hear! Don't forget to mark this SOLVED by editing the first message and selecting the appropriate subject prefix. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 reacted to argjerryl's post in the thread Can't access my proxmox server URL (SOLVED) with Like.
Hi everyone, sorry for the last response just was tired after an overnight shift I had. Thanks @Impact for the github documentation for this problem. And thank you @bbgeek17 and @leesteken for the help! I was able to reconfigure my IP for my PVE...
-
bbgeek17 replied to the thread Update 3 Node PVE Cluster.Hi @muekno , No - there is no requirement to have Ceph with PVE9. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Backing-up Host OS Settings for quick Recovery.There is nothing PVE host specific in PBS. Here is one of many discussions on this topic: https://forum.proxmox.com/threads/official-way-to-backup-proxmox-ve-itself.126469/ Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).As @leesteken mentioned, your existing subnet is different from the one you used on the PVE. You need to re-IP your PVE to place it in 192.168.1.0/24. Pay particular attention to your existing DHCP ranges to avoid further conflicts Blockbridge...
-
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).Hi @argjerryl , welcome to the forum. What exact URL are you trying to access and what is the exact error you are receiving? Could you answer these questions please: What is the IP of your workstation? Can you ping the PVE server? Can you ssh...
-
bbgeek17 reacted to alexskysilk's post in the thread Proxmox stuck after upgrade from 8.4.19 to 9.x with Like.
I've run into this issue multiple times in the past. IF you have linux kernel 6.1 in your available kernels to boot, you can live with it and just pin that kernel. Going forward, you should consider upgrading your motherboard to something from...
-
bbgeek17 replied to the thread Possible regression in PVE 9.2.3: owner = VM when migrating ISO attached as media=disk.I would say there is definitely a problem in the logic here. The ISO cannot be "owned" by the VM, its a shared object. The reason its "VM" is due to failing to determine the owner's ID and the ID value not being set. Historically you would get...
-
bbgeek17 replied to the thread Proxmox stuck after upgrade from 8.4.19 to 9.x.I'd recommend trying booting into an older Kernel. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox