bbgeek17's latest activity
-
bbgeek17 replied to the thread How to make a backup physical server Linux CentOS 9 Stream.This thread may help you: https://forum.proxmox.com/threads/proxmox-backup-client-3-3-3-for-rhel-based-distros.164174/ It's my understanding that there are no official RPM packages, but you can build one yourself. Blockbridge : Ultra low... -
bbgeek17 replied to the thread [SOLVED] Not able to add any of my 3 proxmox nodes to PDM.Great to hear that you found the root cause. Fill free to mark this thread as SOLVED by editing the opening message and selecting appropriate option near the subject. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread proxmox 8 - how migrate vm without shared storage ?.https://bugzilla.proxmox.com/show_bug.cgi?id=7239 Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Proxmox 9 with shared LVM on iSCSI problem.You can create a non-production cluster with two nodes The example references a PVE cluster with 2+ nodes This ^ is not a step in the referenced document. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Proxmox 9 with shared LVM on iSCSI problem.Are your PVE hosts configured as PVE cluster or not? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread VMFS equivalent in Proxmox? Shared iSCSI filesystem across multiple nodes.There are commercial products, including ours, that provide stable enterprise-grade storage solutions fully integrated with Proxmox VE. Whether these platforms are a good fit depends on your specific requirements, including workload...
-
bbgeek17 reacted to Johannes S's post in the thread VMFS equivalent in Proxmox? Shared iSCSI filesystem across multiple nodes with
Like.
You can use LVM-thick on iscsi but only as block storage, not as file system. PVE has a mechanism to ensure the conistency of the data stored on LVM inside a cluster. @bbgeek17 provided some writeups on that... -
bbgeek17 replied to the thread Unable to get Virtual Machine on the network. I believe my network setup is incorrect..I'd recommend getting familiar with using CLI and doing it via physical console. Since it's the only IP on your system, any mistake (UI or CLI) will cause access disruption to the system. Just take address and gateway lines and move it under...
-
bbgeek17 replied to the thread Help me understand my storage options.Start-to-end? No. You need to perform a subset from CLI. Especially if Multipath is involved. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Help me understand my storage options.Hi @mhentrich . You can use either iSCSI or FC. The resulting view from PVE perspective is the same. You are correct that you would present LUNs, or single large LUN, to your hosts. You would then use LVM, not LVM-thin. You will be able to use...
-
bbgeek17 replied to the thread Unable to get Virtual Machine on the network. I believe my network setup is incorrect..Welcome to the forum @aztekapride . You need to move the IP address from the bond0.340 to the bridge, and move the bridge to the bond0.340. That is the most common approach. Otherwise, you will need to tag the traffic in VM internally...
-
missing "a" in ShredDir ? To fix the missing iso ? edit: double check your keyboard, If letters are missing or mixing in configuration as in this thread, errors will be excepted.
-
bbgeek17 replied to the thread storgae configuration.You are correct. It is for storage that is suitable to contain ISO images, which are files. The ZFS and LVM (local) storage are raw block devices, they cannot store files. They are not available for this step in the Wizard. I cannot tell how...
-
bbgeek17 replied to the thread storgae configuration.@Impact is right on - you are on ISO selection screen, not disk. Select "Do not use any media" and then Next. You can come back later to add an ISO, if you need one. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread Proxmox 9.1.4 import SUSE VM from ESXi.As I mentioned, I am not a SLES expert. I don't know whether you properly booted into Rescue mode. I am not sure whether the disk of the VM is still there, is it? Perhaps you need to execute a few more commands to make the Rescue mode usable...
-
bbgeek17 replied to the thread Proxmox 9.1.4 import SUSE VM from ESXi.Run "lsblk" from the rescue mode, then replace UUID=uuid within the file with a /dev/sdX type keyword. Or, if you can figure out the new UUID, with that. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
bbgeek17 replied to the thread proxmox 8 - how migrate vm without shared storage ?.Have you tried to use PVE CLI yet? qm migrate <vmid> <target> [OPTIONS] qm migrate <vmid> <target> [OPTIONS] Migrate virtual machine. Creates a new migration task. <vmid>: <integer> (100 - 999999999) The...
-
bbgeek17 replied to the thread [SOLVED] local fs full: ghost files edition.The backup was configured to store files in a folder /mnt/usb/dump. It does not know whether that folder is backed by USB, NVMe, or Cloud drive. At some point when the backup was executed the USB was either not present or not recognized. The...
-
bbgeek17 replied to the thread Proxmox 9.1.4 import SUSE VM from ESXi.Can you find out the context of your /etc/fstab ? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Proxmox 9.1.4 import SUSE VM from ESXi.I meant it just as a test that it boots. If I remember correctly, PVE is not a supported hypervisor from SAP HANA contract perspective. Perhaps it has changed since I last looked? Blockbridge : Ultra low latency all-NVME shared storage for...