bbgeek17's latest activity
-
bbgeek17 reacted to ds88284's post in the thread Open with PVE UI adds wrong port at the end with
Like.
Thank you for the response! I actually found the answer in this forum: https://forum.proxmox.com/threads/suggestion-for-open-in-pve-ui-option.171881/ I was able to go in and change the UI URL directly, which fixed my issue. -
bbgeek17 replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.You may be running into a MAC address conflict. Why are you manually assigning MAC addresses? There are no widespread reports of similar failures in the forum, none, in fact, so this appears to be something specific to your environment. The...
-
bbgeek17 replied to the thread Proxmox 9 with shared LVM on iSCSI problem.You cannot have Shared storage in a two node non-cluster installation. Shared storage, as defined by PVE terminology, is part of the cluster. Everything you do after that is a road to data corruption. There are coordinated operations...
-
bbgeek17 replied to the thread Raid Controller compatibility with Ceph.Hi @thanosg , welcome to the forum. Ceph does not have awareness of a model number or vendor of your raid controller. Practically any controller configured in non-raid mode is compatible. Blockbridge : Ultra low latency all-NVME shared storage...
-
bbgeek17 replied to the thread proxmox 8 - how migrate vm without shared storage ?.Hi @carnyx.io , you stated that you do NOT have shared storage, yet the screenshot is showing that all storage pools are marked as Shared. As shown in the screenshot the PVE is told by current configuration that it should expect the same storage...
-
bbgeek17 replied to the thread A guard rail suggestion to avoid losing everything like I just did..Hi @anthony1956 , welcome to the forum. While I sympathize with your situation and your request, we have all been there, what you are proposing is essentially a "knee-jerk" reaction and has very little chance of being implemented. It may make...
-
bbgeek17 replied to the thread Is there a bulk API to fetch Proxmox VM UUID (smbios1) for multiple VMs at once?.Hi @Pravallika Modugula , welcome to the forum. To answer your question: my understanding is that only the resources query returns a limited configuration subset for all VMs. If the particular parameter you are looking for is not available...
-
bbgeek17 replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.You've already established that the bridge and underlying network works correctly, at least partially. The two main differences are VLAN numbers and type of the NIC. Have you tried to move your Windows guest to the same VLAN as a known working...
-
bbgeek17 replied to the thread [SOLVED] No network in Windows Server VMs with bond/802.3ad.You can try using vmxnet3hardware, similar to your Linux machine. An output of your in-VM network configuration might shed some light: ipconfig /all You can also check ARP table on windows - is there anything there? Another option is to get a...
-
bbgeek17 replied to the thread [SOLVED] Not able to add any of my 3 proxmox nodes to PDM.That indicates that you have a network issue. Possibly firewall related. You can run the same command directly from the PVE and it will show you what the appropriate response should look like. You can also try running this command across the PVE...
-
bbgeek17 replied to the thread Install Proxmox to an iSCSI Target/LUN.Hi @PelikanNetzwerk , welcome to the forum. Generally users have reported success using vanilla Debian to bootstrap on iSCSI and then installing PVE on top of it. https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_13_Trixie There are a...
-
bbgeek17 replied to the thread Token already exists.PDM tries to create a token in PVE for authentication. The token has a predefined name. When one already exists you can get this error. You can login to PVE and remove this token so a new one can get created. Cheers Blockbridge : Ultra low...
-
bbgeek17 replied to the thread Proxmox + shared LVM.Hi @fant , While there are some similarities , it seems like your report is not directly related to OP's. It is generally preferred to open a new thread as it avoids mixing different things. In your case it sounds like you have a good repro...
-
bbgeek17 replied to the thread [SOLVED] How to enable the 'non-free-firmware' component in the apt sources and run:.Does changing your repo file to below work? : deb http://ftp.de.debian.org/debian bookworm main contrib non-free-firmware deb http://ftp.de.debian.org/debian bookworm-updates main contrib non-free-firmware deb http://security.debian.org...
-
bbgeek17 replied to the thread [SOLVED] Not able to add any of my 3 proxmox nodes to PDM.You can also try curl -k https://[fqdn or IP]:8006 , this will show not only that the port is open but that you get a full response. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread [SOLVED] Qemu agent install on PDM.Try: rm -rf /var/lib/apt/lists/* apt clean apt update Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Open with PVE UI adds wrong port at the end.That is a somewhat critical piece of information for your particular situation. You can create a trusted self-signed certificate for the IP if you wanted. Without looking at the code I suspect that it is hard-coded. You may want to try to...
-
bbgeek17 replied to the thread Open with PVE UI adds wrong port at the end.Hi @ds88284 , welcome to the forum. Ports 8006 and 8007 are the correct ports for Web GUI of PVE and PBS. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
bbgeek17 replied to the thread Web GUI unavailable.I understand that you've already resolved your issue. Just to address this question ^ , you seemed to have had access via SSH. You can do everything via CLI, including VM backup. Cheers Blockbridge : Ultra low latency all-NVME shared storage...
-
bbgeek17 replied to the thread Unable to parse volume ID.@tomachi , while we can try to infer that you are asking for help, technically your post reads as a statement. There is no reference as to what you are trying to do and why. Where is your image located (pwd; ls -al vm-201-disk-0.qcow2) ? Is it...