Recent content by 2Stoned

Qemu guest agent is installed and running. Ballooning works as well.

Danke für deine Antwort. Wenn ich also Ton auf einer VM mit eigener GPU, Maus und Tastatur nutzen möchte, müsste ich eine Soundkarte per USB oder PCI(e) durchreichen, richtig? Das onboard-Chipset kann man so nicht übergeben? Alternativ könnte ich allenfalls Ton über HDMI ausgeben lassen.

I set up an Ubuntu VM with passed-through GPU, mouse, and keyboard. When the host is not reachable, also the VM cannot establish a network connection, even though ip a shows eth0 UP. After a reboot, it is working fine again.

Einen schönen guten Abend Gibt es eine Möglichkeit meinen Realtek onboard Audio Controller (Mainboard: Gigabyte Aorus Ultra) an eine VM durchzureichen? Hardware -> Add -> Audio Device lässt mir nur die Wahl zwischen ich9-intel-hda, intel-hda und AC97 mit Backend Driver spice. Hiervon...

Hi there I'm passing through an RX580 AMD GPU to an Ubuntu 20.04 VM. I can restart the VM from within the VM, but not from the host. When I shut down the VM I cannot restart it from the host. I won't get graphic output anymore. I read about this issue a lot, but I did not come across a solution...

Some issues remain (cannot shut down VM and restart it later from proxmox GUI, but restart within VM works), besides that, passthrough of my RX580 seems to work. I used the following guides: [1], [2], [3], [4] In addition to that I had to: disable AER (and therefore also ACS) in BIOS...

In the host BIOS I disabled ARI, ACS, and AER. Now I am able to pass-through the AMD GPU to the Ubuntu 20.04 VM. At first, I got no graphical output from the VM. But, the GPU was listed under lspci. I had to reboot the host. Now I get graphical output from the passed-through GPU. But now, I...

I added the GPU ROM, without any change.

I try to passthrough a AMD RX580 GPU to a VM, which boots fine without the GPU. With the GPU added as an "all function" PCIe device I only get the Guest has not initialized the display (yet) message in the console. CPU: AMD Ryzen 3950X, Mainboard: Gigabyte Aorus Ultra, Virtualisation-related...

Sorry, I did not mention that I already did that before. My config looks like this atm: auto lo iface lo inet loopback iface eth0 inet manual auto vmbr0 iface vmbr0 inet static address 192.168.0.50 netmask 255.255.255.0 gateway 192.168.0.1 bridge_ports eth0...

I have exactly the same issue with a very similar VM config. agent: 1 balloon: 8192 bios: ovmf bootdisk: scsi0 cores: 12 cpu: host efidisk0: VMstorage:vm-102-disk-1,size=1M hostpci0: 0a:00,pcie=1 ide2: local:iso/ubuntu-20.04-desktop-amd64.iso,media=cdrom machine: q35 memory: 60000 name: Ubuntu...

Thank you for updating it! I'm not even doing FullHD over noVNC, so that should not cause the issue. But when installing arch (pure CLI) it was snappy, also downloading packages and installing them went quickly. I successfully passed through a 10GBit network card (Aquantia AQC107 Chip). I did...

Well, mainly because the Wiki says so. ;) And I got the following messages in the host's console, when I try to add a Radeon RX580 to an Arch Linux VM (OVMF BIOS, q35) which only displays "Guest has not initialized the display (yet)" in noVNC. Apr 23 16:35:06 pvehost kernel: vfio-pci...

Ok, ip a now always shows that the link is UP, but I can connect to the host only every second boot.

Thank you very much. It looks good so far. Thank you also for the link to better understand the why! Very helpful, indeed!