pveversion -v - ist die Installation aktuell? pct config <vmid> - die Konfiguration des Containersip address show - die laufende Konfiguration des Netzwerksip route show - die Routingtabellecat /etc/network/interfaces - die Konfiguration des Netzwerks[code]...[/code]-Blöcke verpacken, der Editor bietet dazu das "</>"-Symbol an.ich habe nen anbieter.
proxmox-ve: 9.1.0 (running kernel: 7.0.2-4-pve)
pve-manager: 9.1.11 (running version: 9.1.11/8eac2c86f015bdda)
proxmox-kernel-helper: 9.0.4
proxmox-kernel-7.0: 7.0.2-4
proxmox-kernel-7.0.2-4-pve-signed: 7.0.2-41: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether bc:24:11:6d:23:0c brd ff:ff:ff:ff:ff:ff
altname enp0s18
altname enxbc24116d230c
inet IP-1/24 brd 77.90.60.255 scope global eth0
valid_lft forever preferred_lft forever
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 72:64:7a:32:f9:fb brd ff:ff:ff:ff:ff:ff
inet IP-2/24 scope global vmbr0
valid_lft forever preferred_lft forever
29: tap100i0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc fq_codel master fwbr100i0 state UNKNOWN group default qlen 1000
link/ether da:42:29:cf:90:ec brd ff:ff:ff:ff:ff:ff
30: fwbr100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 3e:ea:6b:3e:1a:ae brd ff:ff:ff:ff:ff:ff
31: fwpr100p0@fwln100i0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vmbr0 state UP group default qlen 1000
link/ether 72:64:7a:32:f9:fb brd ff:ff:ff:ff:ff:ff
32: fwln100i0@fwpr100p0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master fwbr100i0 state UP group default qlen 1000
link/ether 3e:ea:6b:3e:1a:ae brd ff:ff:ff:ff:ff:ff
root@main-01 ~ $root@main-01 ~ $ ip route show
default via GATEWAY dev eth0 proto static
77.90.15.0/24 dev vmbr0 proto kernel scope link src IP-2
77.90.60.0/24 dev eth0 proto kernel scope link src IP-1root@main-01 ~ $ cat /etc/network/interfaces
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!
auto lo
iface lo inet loopback
iface eth0 inet static
address IP-1/24
gateway GATEWAY
auto vmbr0
iface vmbr0 inet static
address IP-2/24
bridge-ports none
bridge-stp off
bridge-fd 0Nicht wirklich!
Okay, also ein Hosting-Anbieter - und der Rechner steht demnach wohl nicht bei dir zuhause. Welcher Anbieter das ist, willst du offenbar nicht verraten.
"Cluster" impliziert mehrere Rechner/Hosts. Richtig? Du verschweigst weiterhin viel zu viele Details!
root@main-01 ~ $ cat /etc/network/interfaces
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!
# /etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet manual
# Haupt‑Netz für Proxmox (Management, Default‑Gateway)
auto vmbr0
iface vmbr0 inet static
address 77.90.60.3/24
gateway 77.90.60.1
bridge-ports eth0
bridge-stp off
bridge-fd 0
# Netz 77.90.15.0/24 (z.B. für VMs/Container)
auto vmbr1
iface vmbr1 inet static
address 77.90.15.159/24
bridge-ports eth0
bridge-stp off
bridge-fd 0
# Zusätzliche IPs im selben Netz 77.90.15.0/24 (optional auf dem Host)
auto vmbr1:1
iface vmbr1:1 inet static
address 77.90.15.160/24
auto vmbr1:2
iface vmbr1:2 inet static
address 77.90.15.161/24
auto vmbr1:3
iface vmbr1:3 inet static
address 77.90.15.153/24
# Netz 77.90.52.0/24
auto vmbr2
iface vmbr2 inet static
address 77.90.52.70/24
bridge-ports eth0
bridge-stp off
bridge-fd 0
# Netz 77.90.61.0/24
auto vmbr3
iface vmbr3 inet static
address 77.90.61.38/24
bridge-ports eth0
bridge-stp off
bridge-fd 0root@Cluster ~ $ cat /etc/network/interfaces
# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage parts of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT read its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!
auto lo
iface lo inet loopback
iface eth0 inet static
address 77.90.61.122/24
gateway 77.90.61.1Und manche User hier haben auf so einen Ton keine Lust - siehe anderer Thread
Ich wusste ned wie ich es sonst formulieren hätte sollen.Und manche User hier haben auf so einen Ton keine Lust - siehe anderer Thread
Wer nicht in der Lage ist, wenigstens den Threadtitel sauber zu formulieren und den Fehler/Vorhaben zu beschreiben, der sollte die Finger von Proxmox lassen...