NVME issues

[computermaster25]

Hello everyone! I have installed a new R630 dell server in my cluster and am using 3 NVME drives in the server. only 1 of 3 of the drives are showing. Im not sure if its a driver issue or what. The one showing up is a 500 GB Samsung NVME stick but the ones not showing up are shown below. I have also attached the logs. Thank you!

Kingston NV3 1TB M.2 2280 NVMe SSD | PCIe 4.0 Gen 4x4 | Up to 6000 MB/s | SNV3S/1000G​

 

[news]

The take a second Mainboard with 3x nvme m.2 slot and test again.
Or you have have a Problem with MegaRAID SAS 9260-4i / 9260-8i / 9260DE-8i / 9261-8i also.
I have a mainboard with 2x NVMe PCIe 4.0 x4 with ZFS and can add a third to the PCIe 4.0 x16 with a riser card.

 

[computermaster25]

The take a second Mainboard with 3x nvme m.2 slot and test again.
Or you have have a Problem with MegaRAID SAS 9260-4i / 9260-8i / 9260DE-8i / 9261-8i also.
I have a mainboard with 2x NVMe PCIe 4.0 x4 with ZFS an can add a third to the PCIe 4.0 x16 with a riser card.

I should also mention im using a card already. GIGABYTE CMT4034 PCI-Express 3.0 x16 PCI-Express 4 x M.2 PCIe x16 Card

 

[shbaek]

Check BIOS settings, update firmware, ensure NVMe module is loaded, and verify PCIe compatibility and
Ensure your PCIe adapter (GIGABYTE CMT4034) is properly detected in BIOS and try switching PCIe slots if necessary.