Установка Proxmox VE

[trif]

Доброго дня, форумчане! Помогите решить проблему при установке.... я новичок в Linux.
Делаю установку в графическом режиме. Нажимаю на верхнюю вкладку -> потом переключается на это окно и все..... Ждал несколько часов дальнейшей загрузки... безрезультатно....
debian12, OMV установился без проблем.... когда в OMV переключаюсь на ядро proxmox - аналогичная проблема!


HELP HELP HELP HELP HELP!!!!!!!!!

 

[cheiss]

Hi,

first on, please note that this is an English forum, that way more people might help.

Anyway, it seems you have a Nvidia GPU installed in your system, as it tries to load the nvidiafb. The driver situation is unfortunately not easy w.r.t to these cards.

But adding the nomodeset kernel parameter should help, as always: Adding the nomodeset Kernel Parameter

Please note that there are a lot of threads regarding this topic, a simple search will also reveal the same solution.

 

[trif]

Hi,

first on, please note that this is an English forum, that way more people might help.

Anyway, it seems you have a Nvidia GPU installed in your system, as it tries to load the nvidiafb. The driver situation is unfortunately not easy w.r.t to these cards.

But adding the nomodeset kernel parameter should help, as always: Adding the nomodeset Kernel Parameter

Please note that there are a lot of threads regarding this topic, a simple search will also reveal the same solution.

Thank you very much, Christophe!
Yes, I agree, I will use a translator! Unfortunately, this problem threw me off balance))))

 

[trif]

Thank you very much, Christophe!
Yes, I agree, I will use a translator! Unfortunately, this problem threw me off balance))))

Hi,

first on, please note that this is an English forum, that way more people might help.

Anyway, it seems you have a Nvidia GPU installed in your system, as it tries to load the nvidiafb. The driver situation is unfortunately not easy w.r.t to these cards.

But adding the nomodeset kernel parameter should help, as always: Adding the nomodeset Kernel Parameter

Please note that there are a lot of threads regarding this topic, a simple search will also reveal the same solution.

Kristoff, good day!!!
Thanks for your advice and tip! I did everything last night and everything works!!!
Good luck!!! Success!!!

 

[trif]

Good day to all!
I encountered such a problem....
The power went out and my server stopped booting. I decided to reinstall Proxmox, but I constantly get this message at the beginning or at the end of the installation "Unable unmount ZFS".
Since I have an NVIDIA video card, I boot with nomodeset, as Christoph advised me.
I connected 2 ssd drives to usb 3.0 and want to make RAID1 ZFS on them, but I get this error, although the previous time I succeeded!
Then I moved these drives to SATA connectors, but the situation did not change! I read here that you can edit the UEFI bootloader and everything will work out!... My motherboard does not have this option, I reset the bios to its original state, but the situation did not change....
Tell me what the problem could be? What am I doing wrong?
If you select RAID1 BTRFS - everything is installed well!

My motherboard is MSI MPG Z790 EDGE TI MAX WIFI, 2 ssd drive is Kingston SKC600
sorry for my english

 

[TailerLan]

Добрый день.
Если кто сталкивался с проблемной установки Active Backup for Business от synology ?
Подскажите как решить проблему:
"
Please add the source URL, install it from another source, or make sure network connection is available.
* install linux-headers-6.8.12-10-pve failed, please try again later, or run 'apt install linux-headers-6.8.12-10-pve manunally or download and install package from https://packages.debian.org/bookworm/linux-headers-6.8.12-10-pve
If you are using a third-party kernel, please contact the kernel provider for the kernel headers package.
* Please review the highlighted information above.

В репах есть proxmox-headers, но непомогло.