Problem with

[leinadri]

I've been working around here with the new server and maybe I'll need your help, as you're more comfortable with this hardware.
I'm trying to install Proxmox 6.4 on the server and I'm having problems getting the network card to connect.

Is some type of driver or specific command required to allow connectivity?

 

[andaga]

Can you post a screenshot of your config page network into the web ui?

 

[niteshadow]

You mean Proxmox 8.0 ?
So the server's IP is set to 192.168.1.26 ? Is that correct for your connected NIC (make sure to connect just one NIC during install) ?

 

[andaga]

I mean this page

 

[leinadri]

Sorry, i forget the name oh the device card... Its a Add-on Card AOC-STG-b2T

 

[andaga]

Not understand what you mean with your last reply? You have understand your issue?
Do you need more help? If yes post the same screenshot as the above example

 

[Chris]

Hi,

I'm trying to install Proxmox 6.4 on the server

why are you trying to install this Proxmox VE version? This is EOL since quite some time now, see https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_frequently_asked_questions_2

Is some type of driver or specific command required to allow connectivity?

Your bridge is up and the network interface ens1f0np0 is connected to it.

You might want to find out which NIC this corresponds to by flashing the LEDs with ethtool -p ens1f0np0. The IP is configured on the bridge as 192.168.1.26. What connectivity issue are you facing exactly? Can you ping the host? Are you connected to the same subnet?