Installation issue on NVME SSD

[tariqhussain.sa]

Dear Support,

I am trying to test Proxmox 6.1 on NVME SSD and selected UEFI boot but after getting IP Address from DHCP screen goes blank and I have hold 30 minutes but not luck.

What was the issue on it. Can you guide me because I am still testing.

Regards,
Tariq Hussain
+923222425582

 

[apoc]

Hello Tariq,
Try using the search and look for "black screen" or "blank screen".
There are plenty of posts that explain options / potential solutions.
All the best

 

[tariqhussain.sa]

Thanks for your feedback.

Can you send any post in which defined Proxmox installation on NVME SSD with ZFS. (I have two HDD and need Raidz1)

Regards,
Tariq Hussain
+923222425582

 

[oguz]

hi,

I am trying to test Proxmox 6.1 on NVME SSD and selected UEFI boot but after getting IP Address from DHCP screen goes blank and I have hold 30 minutes but not luck.

do you have a DHCP server on your network to assign you any IP? if not there can be trouble like this.

we can't help you much with this little info. maybe you can send a picture of the hung screen?

Can you send any post in which defined Proxmox installation on NVME SSD with ZFS. (I have two HDD and need Raidz1)

nothing special you have to do. just boot and start the installation process, and during the disk setup select raidz1 with your disks

 

[tariqhussain.sa]

Please check attached snapshot for diagnosing. I am using Proxmox 6.1 ISO also install log (/tmp/install.log) is not created during installation as on screenshot.