Hi,
Sorry for my bad English.
I have 2 boxes, with almost identical hardware
each box has 2 nic
box1 is working perfectly
however, on box2, if I start any VM connected to eth1, the eth1 will have many many errors on after 1-2 minutes
I am pretty sure it is not hardware problem, because I had changed NIC, cables and the switch port.
My config:
Can anyone tell me how to solve this problem or where to start troubleshooting?
Thank you in advance.
Sorry for my bad English.
I have 2 boxes, with almost identical hardware
each box has 2 nic
box1 is working perfectly
however, on box2, if I start any VM connected to eth1, the eth1 will have many many errors on after 1-2 minutes
Code:
eth1 Link encap:Ethernet HWaddr 00:1b:21:6d:34:d2
inet6 addr: fe80::21b:21ff:fe6d:34d2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1257 errors:2886218022240 dropped:481036337040 overruns:0 frame:1924145348160
TX packets:9 errors:962072674080 dropped:0 overruns:0 carrier:962072674080
collisions:481036337040 txqueuelen:1000
RX bytes:78879 (77.0 KiB) TX bytes:698 (698.0 B)
Memory:fe4c0000-fe4e0000
I am pretty sure it is not hardware problem, because I had changed NIC, cables and the switch port.
My config:
Code:
vh102:/var/log# pveversion -v
pve-manager: 1.7-10 (pve-manager/1.7/5323)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.7-28
pve-kernel-2.6.32-4-pve: 2.6.32-28
pve-kernel-2.6.18-2-pve: 2.6.18-5
qemu-server: 1.1-25
pve-firmware: 1.0-9
libpve-storage-perl: 1.0-16
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-9
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.13.0-2
ksm-control-daemon: 1.0-4
vh102:/var/log# cat /etc/network/interfaces
# network interface settings
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
auto vmbr0
iface vmbr0 inet static
address 172.18.1.202
netmask 255.255.255.0
gateway 172.18.1.254
bridge_ports eth0
bridge_stp off
bridge_fd 0
auto vmbr1
iface vmbr1 inet manual
bridge_ports eth1
bridge_stp off
bridge_fd 0
vh102:/var/log#
Can anyone tell me how to solve this problem or where to start troubleshooting?
Thank you in advance.