I am unable to install Proxmox on my raid created on the LSI MegaRAID SAS 9240-8i (latest firmware), motherboard is an Asus P8Z77-V Deluxe (latest bios).
If I just let the installer sit there (and press enter to begin the installation of course) and F2 for verbose-mode; this is what I see:
If I start the installation with the debug-tag I see the following:
I had Proxmox (2.2) running on the machine before I got the raid-card with one of the disks that are in the raid, and I would love to continue using this awesome product.
Any tips to get it running for me?
If I just let the installer sit there (and press enter to begin the installation of course) and F2 for verbose-mode; this is what I see:
Code:
...
loading drivers
megasas: INIT adapter done
(about five minutes later)
INFO: task modprobe:289 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
INFO: task scsi_scan_16:294 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
(This messages repeats infinitely)
If I start the installation with the debug-tag I see the following:
Code:
...
megasas: 00.00.06.14-rh1 Fri. Jan. 7 17:00:00 PDT 2012
megasas: 0x1000:0x0073:0x1000:0x9240: bus 1:slot 0:func 0
megaraid_sas 0000:01:00.0: PCI: INT A -> GSI 1 (level, low) -> IRQ 16
megasas: FW now in Ready state
megasas_init_mfi: fw_support_ieee=67108864
megasas: INIT adapter done
scsi16 : LSI SAS based MegaRAID driver
(about five minutes later)
scsi 16:0:0:0: megasas: RESET -1 cmd=12 retries=0
megasas: [ 0]waiting for 1 commands to complete
megasas: [ 5]waiting for 1 commands to complete
(Counts upwards infinitely)
I had Proxmox (2.2) running on the machine before I got the raid-card with one of the disks that are in the raid, and I would love to continue using this awesome product.
Any tips to get it running for me?