dell

Hello, First post. I wanted to see if anyone could offer some suggestions/best practice for configuring a Dell R710 with PERC H700. From what I can tell it looks like a lot of people have come by these units over the last couple years for home experimentation. I've worked though a few...

Hi, I recently bought myself a DELL PowerEdge R470 Server and installed Proxmox 7.0.13 on it. It's working great, but all the virtual machines have the same ipv4 on the internet. They only have different IP addresses on my local network. I looked a bit around but I couldn't figure out how to...

When I try installing Proxmox with the NIC installed, it crashes. When I install without the NIC it installs perfectly fine but I can't access the web interface (because there is no NIC) and if I install the NIC after proxmox is installed, it doesn't boot correctly and gives an error message...

Hi, we just got our brand new Baby from Dell, a R6525 with a Dual Epyc 7543 (Milan) set of CPU's. Since it will become part of our PVE cluster, i tried to install Proxmox 6.3 on it without success, the same with Proxmox 6.4. The system gets stuck after the boot message, at least nothing...

Hi, we just got our brand new Baby from Dell, a R6525 with a Dual Epyc 7543 (Milan) set of CPU's. Since it will become part of our PVE cluster, i tried to install Proxmox 6.3 on it without success, the same with Proxmox 6.4. The system gets stuck after the boot message, at least nothing...

Hi, I am trying to configure multipath with a DELL SC5020 iscsi storage. I followed the official Proxmox guide but can't get it to work. I think the problem is in the configuration of the multipath.conf file. I am using Proxmox 6.4 I've been testing various configurations of the multipath.conf...

Hi all, I wanted to switch my virtual machines from a DELL R220 II with Proxmox 4.4.1 (which was really stable over the years) to a more powerful DELL PowerEdge R420 and the newest Proxmox Release (6.2-1) but I'm facing a quite instable system (which is really anoying). Don't be confused about...

We are having what appears to be 2 issues with our Dell R820 servers. We are in the process of moving from Hyper-V to Proxmox, and as we migrate we are updating the existing Dell hardware to latest (2.7) BIOS and installing Proxmox. So far we have migrated 2 servers from Windows and have an...

Hallo, Ich versuche Proxmox 6.2-1 auf einem Dell MX740c Blade zu installieren. Leider ohne Erfolg. Ich erhalte als Fehlermeldung " No Network Interface found! The install could not find a supported network interface card." Es handelt sich bei der NIC um eine QLogic 2x25GE QL41232HMKR. Der...

Hi, Maybe it could help users using dell poweredge server. Since some months, I have random hang/disk reset on my ceph servers, with non-raid disk only. (poweredge r630, perc h330) I had try to upgrade bios/perc firmware, disk firmware, nothing was working. Last week, I was able to trigger...

hi, i have an issue with a dell r320 server. it works fine with proxmox, but as soon as i have more than 16gb of ram installed the system powers off during linux booting. doing a system check all memory checks are passed successfully. this happens during booting proxmox installation-iso as well...

Hi to everyone!! I'm installing on a brand new Dell T40 with 2x1TB disks a Proxmox 6.2. Before install Proxmox for a USB stick i go to the Dell configuration Utility and create a Raid1 then reboot and put the USB and run proxmox. The first problem is the installer detect both disks and not...

Hi, I work at a local school district and I am trying to setup ISCSI based storage on our newer dell me series san. I have run into several issues while trying to set this up and was hoping that maybe someone could point me in the right direction. In our environment we have 3 hosts with proxmox...

Hello, So I was testing with disk passthrough with my 60tb raid 5 storage on dell 720 server and turns I can pass through the same disk on multiple vms at the same time! I can do r/w on both vms at the same time. I mean is it normal? I tried searching on google but couldn't find any similar...

Hello, We use Dell Compellent as storage for our Proxmox cluster. We plan to implement Dell Compellent Live Volume product on the Compellent. Have anyone ever used this product with a Proxmox cluster? Does anyone have any recommendations? Thank you, Sincerely,

I've finally succeed in installing OMSA on proxmox 6.x and in return for all the information i've found thanks to the community, i wanted to share my findings. Here we go. Be sure to be logged as root at all time : sudo su First, be sure to remove omsa from Proxmox 5.4 before upgrading. apt...

Hallo Proxmox Community, Wir bekommen einen neuen Server mit folgender Ausstattung: Dell PowerEdge R540 über 64GB Ram PERC730+ RAID 4x 960GB SSD SATA Das Ziel ist maximale Performance, auch IO. überwiegend Windows Server VMs, einige Linux Vms. Da die Hardware recht neu ist konnte ich dazu...

Hi, Can I use a Dell Perc H830 RAID Adapter with Proxmox VE? Is this compatible?

I have a Dell MD38xxi SAN which is being used by a cluster of 3 proxmox servers to share storage & provide luns direct to some VM's. Had a few problems recently when adding a fourth proxmox host, so had to completely re-examine my SAN configuration in order to get things fixed. All working...

Hi, I'm looking to install proxmox ve on a Dell PowerEdge R440 with 8 disks of 1 Tb each, 48 Gb of ram. I want to know what is the best RAID configuration for this setup. Thank You!