passthrough

I have a question very similar to this one: Pass USB Device to LXC I have my externel disk enclosure that is plugged in USB on host: root@pve:~# lsusb Bus 004 Device 006: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge...

Hello, I have this specs: CPU: i5-14500 iGPU: UHD Graphics 770 GPU: NVIDIA Geforce GTX 1660 Super Proxmox: ver.8.1.10 ----- - I enabled IOMMU as described HERE - I need fully passthrough my GPU NVIDIA to one of my VM. It works - I lost in PVE access to /dev/dri/D128 Now, I cannot use VirtGL or...

As per title, I've searched at length in the docs, forum and on the net and could not find a proper complete guide on how to correctly exposed a local host disk (say a nvme drive) to a VM. So I though about starting this post, hoping to define a guide for future use cases. My use case: my VM...

Hi, I have a monitor that has several built-in hubs (and a loudspeaker). I connect the monitor using a USB-B 3.0 cable to my Proxmox machine (latest version). I want to passthrough everything the monitor has to offer with regards to USB connectivity. This is the lsusb -tvv output of the...

Hi! I've had a Coral TPU passed through to an Ubuntu 22.04 LTS VM for a while, and as far as I know it's been working well. However, I recemtly noticed that the Frigate docker container was crashing every few seconds. On further investigation, it's reporting that it can't find the Coral TPU. In...

Hi there, Running into an issue with a build I am setting up, specifically passing through a GPU through to a XP VM being used offline, for retro gaming. The GPU does get recognized correctly inside the VM, but fails to start with an Error code 10. I've gone through the forum and tried several...

Hello, for a few hours I am trying to passthrough my 3D Printer to my Octoprint Container. But I can't get it to work - the main Problem is that after adding this to my container config in Proxmox: lxc.cgroup2.devices.allow: c 189:* rwm lxc.mount.entry: /dev/bus/usb/002/008 dev/bus/usb/002/008...

does anyone have success stories of passing a intel x710 virtual function to a win server 2022 instance? I was playing on a very old e7v3 intel system and x540 and can get vfs passed to linux guests but win 10 guest shows an unidentified device when i had a personal system i swear i got the...

Hello, I have been able to pass through my Intel Arc GPU to an Ubuntu 22.04 64-bit server virtual machine. The host in an AMD Epyc 7402 on a Supermicro H12SSL-I running Proxmox 8.1. On the PVE host I have IOMMU working. Here are the steps that I've done. root@hyperion:~# dmesg | grep -e DMAR...

Hi, I have several proxmox nodes that are working well. I am using a Wifi USB Stick to temorary passthrough to defined VMs for installing updates over the internet. This concept works also quite well for me. However, lately I took an old Fujitsu Siemens Machine, also with Proxmox to be used...

Hi zusammen, ich versuche meine Tesla P40 (24GB) an mehrer VM's durchzureichen. Kurzer Status Überblick: VMs: VM1: Windows 11 VM2: Debian Bookworm mdev: nvidia-57 (GRID P40-4A) nvidia-49 (GRID P40-4Q) VM1 hat die GPU als mediated device "nvidia-57". VM2 hat als mediated device...

Hy Leute Hab jetzt mehrer Tage damit verbracht meine GPU in LXC zu nutzen. Hab mich etwas an dieser Anleitung orientiert: https://jocke.no/2022/02/23/plex-gpu-transcoding-in-docker-on-lxc-on-proxmox/ NVIDIA Treiber im LXC funktioniert soweit. Transcoding auch. Mein Problem ist aber das ich...

I'm running Proxmox on my server and recently added a AMD Raden RX 5700 XT. It is affected by the vendor-reset bug, but I solved that. I can now reboot the VMs without any errors. The GPU has 1 HDMI and 3 DP Ports. I initally connected it via HDMI to my Monitor, which is connected to a smart...

I created a new windows 10 VM for the game with a 2060 SUPER in EGPU (Connect in thunderbolt 3) in passthrough, I can update the card drivers, I was able to play minecraft for 20 min but now I have the vm that goes into "Internal error" on proxmox IOMMU groups : in an IOMMU group I have both...

I have a proxmox container running Fhem (to control my thermostat valves). U used this: https://tteck.github.io/Proxmox/ (Fhem) The container is Privileged and the connected usb device is found (to control the thermostats) When i type in this command, i get the following result: ls -l...

Goal - Have hardware transcoding on a virtual machine using a GTX 1070 TI as the GPU. Achieved so far from following https://pve.proxmox.com/wiki/PCI_Passthrough#Enable_the_IOMMU. I have gotten so far to the point now where running nvidia-smi will show me Picture 1 in the VM. I can't get this...

Hello I’ve proxmox 8.1 and I’m using this device from Nipogi AD08 where I've configured Passthrough with Intel Alder Lake. I want to use exclusively the video card “Alder Lake-P GT1 [UHD Graphics]” as PCI, added into proxmox panel, flagged Primary GPC and PCI-Express (All Functions). Display...

I've got two identical NVMe drives (same model, same capacity) in my system. One drive I use for PVE storage. The other I'd like to passthrough to a vm. When I go into the settings of the vm, Idk which drive to select, because Idk which one is which. On the disks overview on the node, the...

Hi, Does anyone knows how to passthrough camera from my Windows through RDP to Ubuntu 22.04, I know that this is not that much related to the ProxMox, but my Ubuntu 22.04 is on the ProxMox 7.4-3, and I saw some comments online that people did it through USB being added to the Ubuntu in the...

I've got a Supermicro X11SPA-TF motherboard with an Intel Xeon 6226R running Proxmox 8.1.1, and I've got a Sapphire 6600XT Nitro+ 8GB in CPU Slot 3 (x16, PCIe 3.0) and an NVIDIA 1660 Ti in CPU Slot 7 (x16, PCIe 3.0). When I assign the NVIDIA card to a VM, it boots and works fine (tested with...