Hello everyone, I have 3 proxmox in a cluster and I need to share the same lun among the 3 of them, I was able to register the same lun on the 3 proxmox and also able to create a LVM from the iscsi and the 3 proxmox are seeing this LVM.
Now the problem is that only PROXMOX-1 is able connect to...
Hello everybody, I have a server that has 5 vg groups, where VMs lives. I came into a problem that the disk that proxmox lives on crashed(NO VM lives on this disk)and now I replaced the disk and reinstall proxmox, how can I bring the VMs that are there in the other drives to live.
Thanks in...
Hello everyone.
I have a 1 Giga network. eth0 and eth1. I bond these two interfaces to bon0 and assign this bond0 to vmbr0. Now when I do a ifconfig -a I can see some tap devices being created. The question is that I can see these tap devices run at 10Mbps and this is really worrying me. Does...
Hello everyone. Here is a little problem I am having that is driving me crazy. I have 4 NIC cards in a server. Here is the configuration. There is a routing problem in the system. When I assign two NIC cards to a VM (vmbr0 and vmbr1). When I tried to ping 192.168.1.0 inside the VM, the traffic...
I have a problem. I have a VM that has 2 more disk assign to it. These two disk are only for data storage. Now, I want to backup the VM and what happens is that it tries to backup the whole thing including the two disks. How can I tell it that I do not want to backup the disks. Just the VM...
I have a driver card that is Adaptec 6805. I know that the the kernel version 2.6.32 has the driver for this card, which is the kernel that I am using. For some reason my system is acting up and I need to see if I can upgrade to 2.6.35. The question is that someone told me that the driver for...
Hello everyone.
I have a problem with my network configuration and my switch, which is a HP 2900.
Here is the bond configuration.
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode active-backup
auto vmbr0
iface vmbr0 inet static...
Hello everyone. I am presenting a problem with my network, which consists of 3 bridges. One that goes to the VM network(10.10.10.0); the one that goes to the FileSystem network(192.168.1.0); and the one that goes to the SAN Network(192.168.10.0). Every time I create a VM for some reason when I...
Hello everyone. I am having a problem with my proxmox box that is driving me crazy. My network has 3 diferent networks.
VM(10.10.10.0)
File(192.168.1.0)
SAN(192.168.10.0)
The problem is that when I restart a VM inside this proxmox, the VM networking service start to fail. I have to manually...
Well I have to say that I am having a hard time with my network. I have proxmox-ve version 1.9. The main problem I am presenting is that packages are getting lost somewhere in my LAN.
Here is my network config IS THIS CONFIGURATION OK.
THANKS UGO
auto lo
iface lo inet loopback
auto eth0...
Hello everyone, I have a question regarding to bond. There are two proxmox host version 1.9, they both have the same network configuration. Just there is a little change in the IP address below that instead of 41 is 40. For some reason the packages are getting lost. I have found using tcpdump...
Hello everyone.
Well I have to say that I am having a hard time with my network. I have proxmox-ve version 1.9. The main problem I am presenting is that packages are getting lost somewhere in my LAN(NO ROUTER RELATED)
Here is my network config
auto lo
iface lo inet loopback
auto eth0
iface...
Hello everyone.
I am presenting a problem. I have a VM in a proxmox host that shutdown by itself, I have to go to it everyday to start the VM. I do not know if there is a configuration problem with Proxmox that is turning this specific VM off. Please help. The proxmox version is:
pve-manager...
i have two proxmox in a cluster which are proxmox1 and proxmox2. there is freenas server which i create 2 targets. the wholw idea is to assign each target to a server for backup purposes. when i assign the first the target to the master everything goes ok i can see the drive as sdh.
1. when i...
I have a adaptec Raid Card 6805 with the Zero Maintenance that comes with 4 Giga of Cache. On top of this this Raid card has 8 SSD Corsair in Raid 10, and each of this Corsair Force Series GT that each is rated at speed of 550 MB/s. When I run the following commands see the output I get...
Hello there. I am having a problem that has to do with driver, I have a board that comes with a RAID controller built in which is the LSI SAS 2008. This controller do not support debian and I am seriously need to use this controller, I have the source code for this controller. Is there any way...
In what version of debian is version 1.9??? I have a adaptec 6805 and needs minimun Debian 5.0.9 to run. Hope the version of debian is later than this one. Thanks in advance for the response.
I have a SAN, and I normally create the volume in the SAN and assign to the proxmox machine using iscsi. My question is if I create a volume that is 3 terabytes big and assign to proxmox. My main goal is to assign this 3 terabyte volume to a specific VM. Will I be able to assign this volume...
Hello everyone, I have a SAN system in which I will store lots of data, the question is I am sure that I will use much more than 2 terabyte of data and I use a program called glusterfs that will not allow me to add more than one disk for storing, the only way out is to have a disk that can hold...
Hello everyone.
I have 2 Proxmox. Each proxmox has two NIC cards. I have been following step by step other posts and put everything exactly, but I cannot get it to work. Here is the whole information.
Proxmox_1
auto eth0
iface eth0 inet static
address 0.0.0.0
netmask 0.0.0.0...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.