Hello everyone, I have a question regarding to bond. There are two proxmox host version 1.9, they both have the same network configuration. Just there is a little change in the IP address below that instead of 41 is 40. For some reason the packages are getting lost. I have found using tcpdump that in one proxmox eth0 is the interface listening and on the other eth1 is the one listening. Could this possibly create this problem that packages are getting confused or something is wrong.
I have bond0
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode active-backup
and vmbr0
auto vmbr0
iface vmbr0 inet static
address 10.10.30.41
netmask 255.255.255.0
gateway 10.10.30.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
I have bond0
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode active-backup
and vmbr0
auto vmbr0
iface vmbr0 inet static
address 10.10.30.41
netmask 255.255.255.0
gateway 10.10.30.1
bridge_ports bond0
bridge_stp off
bridge_fd 0