RAID1, RAID5 and RAID10 are all single-redundancy. So if you lose one drive, there is now only a single remaining copy of your data and any unreadable bits or drive failures during a rebuild means data loss. There are also other factors, such...
Be aware that typically only the 7000 series Dell Optiplex Micro systems have the dual NVMe slot. Others are one NVMe and almost all have one 2.5" SATA as well.
Small form factors seem cute and cool, but I would suggest avoiding them unless you...
I've been following this discussion with interest, and I'd like to add some numbers and a practical perspective.
As of November 18, we've had ten kernel releases in just 43 days, from 7.0.14-21 to 7.0.14-30.
I operate a three-node Proxmox...
If you plan to have an HDD-based PBS server as your only backup, I'd suggest looking at some community-provided scripts to automatically power on, run backups, then power off if you are concerned with power usage. Running 24x7 with hard drives...
I'll also agree with the previous recommendations, and for decades, best practice has been to isolate all management interfaces and they are only available via specific workstations, known as PAWs or SAWs, as well as a separate authentication...
From what I've seen you can definitely get away with less memory than the recommendation. But you'll want a decent amount of swap available to avoid the OOM killer. Also, with hard drives as your datastore, less memory means less disk caching...
On a single (homelab) node, one NIC is not a deal-breaker.
16GB RAM depends on your LXC/VM needs - as you will have approx. 14GB available.
BUT: The one single M.2 drive in my opinion is an issue. It is a SPOF & on a (cheap) mini-PC this can fail...
With your divergent VMware/vSphere infrastructure, I would strongly recommend contracting with a Promox Support Oganization that has experience dealing with large heterogeneous hardware and storage infrastructure migration.
I do not recommend...
PVE virtualizes Debian without any issue. The configuration, as you put it, depends on your choice of kernel and software (which would define the minimum hardware required in terms of cpu feature support and minimum ram required.)
But if I may...
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...
Hast du schon folgendes gefunden? https://pve.proxmox.com/wiki/Advanced_Migration_Techniques_to_Proxmox_VE#Physical-to-Virtual_(P2V)
Selbst habe ich im Homelab mal zwei Windows-Systeme mit folgenden Tool virtualisiert...
Confirmed that the rtl8159u works with in-tree driver on my N100 minipc but lack of firmware causes failure to up nic at 10gbe. It will negotiate 5gbe when asked.
Worked at 10gbe, achieved ~8.3gbe on usb3 Gen 2x1, which is better than the 7.5gbe...
This is now in the enterprise repo since 7.0.14-30-pve
See source: https://git.proxmox.com/?p=pve-kernel.git;a=commit;h=440212e21adda0ed08daba7176a2662d167a1b50
This is now in the enterprise repo since 7.0.14-30-pve
See source: https://git.proxmox.com/?p=pve-kernel.git;a=commit;h=440212e21adda0ed08daba7176a2662d167a1b50
Hello Proxmox community,
I'm developing AEGIS OS, an independent Debian-based Linux distribution focused on desktop usability, privacy, cybersecurity education, and defensive security.
The project uses KDE Plasma and aims to provide a...