Thank you @s.haigh - I performed a test by fully shutting down 1 node, pulling the mains power, and then starting it back up. The USB Realtek NIC initialized normally and all was fine. I see at https://lkml.iu.edu/2605.0/01154.html it mentions...
Thank you @s.haigh - I performed a test by fully shutting down 1 node, pulling the mains power, and then starting it back up. The USB Realtek NIC initialized normally and all was fine. I see at https://lkml.iu.edu/2605.0/01154.html it mentions...
The firmware file `rtl_nic/rtl8157-1.fw` isn't included in the linux-firmware repo [0]. As such, its unlikely to be included in a package until it is.
If you power off the hardware and power it on again, does it still work without that firmware...
Got this installed on my little 3-node cluster. 2 × Intel 285H and 1 × 255H. No issues so far.
One thing is, I have been using the out-of-tree Realtek r8152 driver to power my 5Gbit USB-C NICs. Since those are now supported in tree, I removed...
I am running 9.2.26.
I setup acme cert for letsencrypt. I am able successfully able to provision the cert. when I go to log in using the fqdn, it takes forever to show the login page, then fails the login with known good credentials.
When the...
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...
If you are already using the pve-enterprise repo, and you *only* want to pull in kernel updates from the `pve-no-subscription` repo, you can drop in the following as the file: /etc/apt/preferences.d/pve-no-subscription:
Package: *
Pin: release...
Would be interesting to see what you see with the 7.3 series just announced:
https://forum.proxmox.com/threads/opt-in-linux-7-3-kernel-for-proxmox-ve-9-available.187665/
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...
One clarification: local-lvm at 100% means the thin pool has no free space, not that the 60TB array is full. You can't reclaim space from that separate RAID by shrinking it into the 53GB volume. First check `vgs`, `lvs` and `pvesm status`: if the...
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...
We recently uploaded the 7.3 kernel to the test and no-subscription repositories of all our Debian Trixie-based releases. It will stay an opt-in kernel for these release series, while the 7.0-based kernel remains the default for them.
Unlike our...