We’re developing this in the open because, once it reaches GA, we’ll submit it upstream as a full pull request. As a Ceph Foundation member and an employer of upstream maintainers, we’ve always merged our code upstream, and pushing upstream...
Yes, it's still issue 3229.
The patch was proposed but not in the available code , yet. One workaround you may try is "qm move-disk" from source node to local storage on the target node.
Cheers
Blockbridge : Ultra low latency all-NVME shared...
Everything is running latest - pve-manager/9.2.28/310cfbc506c4490f (running kernel: 7.0.14-29-pve)
When I try to migrate via GUI: (No option to change storage)
When I try to migrate via CLI trying to specify different storage. Tried various...
Danke. Den Wiki-Eintrag hatte ich auch schon gefunden. Ich scheine aber irgendwie etwas auf dem Schlauch zu stehen. :confused: Für mich sieht es derzeit so aus, als sei ich in meinem normalen System, also nicht in irgend einem GRUB-Recovery oder...
https://pve.proxmox.com/wiki/Recover_From_Grub_Failure
Sieht passend aus und der erste Schritt mit Starten Rescue Modus des Installationsmediums ist bereits geschafft. :)
One of the questions I consider most important is: why, in the year 2027, is there almost no support for VLANs in the default Proxmox installation or kernel?
Kleiner Nachtrag:
Wenn ich auf der Konsole efibootmgr eingebe, dann wird mir nur der Proxmix-Installer-USB-Stick gelistet, von dem ich über Rescue boot das System gestartet habe.
root@pve:~# efibootmgr
BootCurrent: 0001
Timeout: 0 seconds...
There wouldn't be much of a point if you don't know the actual origin of open connections since the community script by design pull further components from github. Maybe one of them updates their software that way? I never bothered to read the...
The only combination from my point of view is to have some HDD and at least two SSD/NVMe for a Special Device. A separate disk for the OS is... not necessary at all.
In a nutshell: during installation install on all HDDS, in Mirrored/Raid10...
Good day,
exact same problem with new line on our site. Removing that single empty line from the delivered message restores the original body hash.
Any ETA for fixing these?
I run PBS on my TrueNAS box as a LXC container. My trueNAS box is based on a upcycled Asrock Rack S4P2143/D2143D8UM motherboard that I pulled out of a Datto S4XP4000 Intel Xeon D-2143 machine that I picked up on ebay for $249. I did a few...
So think of your setup PBS need SSDs IOPs! So only hdds will not work, as you expected. you also need Compote power for calculate. Can you use ECC Ram on your low power Desktop PC.
A PBS is not a NAS, it serve you to backup proxmox ve lxc and vm...
Hi @tillin9 , welcome to the forum.
It would be great if you could:
a) add your storage configuration (cat /etc/pve/storage.cfg) as text encoded with CODE tags
b) add output of "pvesm status" from source and destination nodes
c) present exact...
Interesting that removing recent Windows updates can restore boot, but the inconsistent behavior makes Server 2025 hard to trust in production. I'd be cautious with updates until Microsoft addresses this.
Hallo zusammen,
ich habe heute einen meiner zwei Proxmox VE-Cluster-Knoten aktualisiert. Dabei wurde auch der Kernel von Version 7.0.14-24 auf 7.0.14-26 aktualisiert. Nach dem Update habe ich daher den Rechner neu gestartet und musste dann...
For a nas simple take a UGREEN NASync DXP6800 Pro/ Ultra 6-Bay, add extra ddr5 memory and a nas server os and you are fine.
But Promox BS must run on its own drives, not over a slow network.
How many lxc and vm do you have, have you ever use zfs as underlying file - and storage system.
Do you every read something about zfs special device on flash drives, i.a. ssd flash storage with dram cache with plp on tlc cells, sata III work...
So think of your setup PBS need SSDs IOPs! So only hdds will not work, as you expected. you also need Compote power for calculate. Can you use ECC Ram on your low power Desktop PC.
A PBS is not a NAS, it serve you to backup proxmox ve lxc and vm...
Ah. Vielleicht noch als abschließende Frage:
Eine Änderung an "spa_slop_shift" wird generell durch Reboot zurückgesetzt? Oder kann man das dauerhaft setzen?