9.2.2 is pretty old. I expect you’re missing the updates to allow the newer authentication: https://forum.proxmox.com/threads/cephx-key-migration-procedure-and-ceph-19-2-squid-going-eol-soon.186276/
Hallo rothkraut,
etwas spät, aber vielleicht hilft es dir oder anderen, die über die Suche hier landen.
Das Konzept kann funktionieren, hat aber ein paar Stolperfallen:
1. Die VMs existieren an Standort B dauerhaft. Wird eine versehentlich...
Coming back to this in case it helps you or others searching for an SRM equivalent on Proxmox.
With shared LVM on NetApp FC and Veeam already in place, the realistic options are:
1. Veeam restore to the DR cluster. Veeam supports Proxmox VE, so...
Late to this, but in case it helps you or anyone landing here from search.
As bbgeek17 said, PVE has no built in way to replicate LVM volumes between two independent clusters. Storage replication (pvesr) only works with ZFS. With LVM on both...
We also set iptables to accept all
To clarify further about our setup:
Router (for internet access) connected to Switch and PVE-host connected to Switch
PVE-host gets IP via DHCP from Switch - both with PVE-Firewall on and off
VMs only get...
Almost, just don't mount it inside /var/lib/vz. Mount it somewhere of its own like /mnt/backup (fstab with the UUID), then Datacenter > Storage > Add > Directory, point it at /mnt/backup and pick "VZDump backup file" as content. After that it...
I'm afraid that's not possible anymore, since all nodes have been upgraded now. I could only show you the output of the target node, as the source node has since also been upgraded:
# pveversion -vproxmox-ve: 9.2.0 (running kernel: 7.0.14-26-pve)...
We ourselves use only PBS, our customers use what they already bought and there are all big players in the boat: Veeam, Rubrik, Commvault, ...
I only move them towards PVE, but our customers use their backup solutions if they support this. Some...
Would be also nice to get the pveversion -v from both source and target of a failed migration, the complete /run/qemu-server/<vmid>-swtpm.log from both nodes around the failure, the storage type of where the tpmstate0 volume is on, whether the...
New FC script is now available.
The latest updates focus not only on monitoring connectivity and path status, but also on identifying potential I/O problems and correlating events from different Linux subsystems.
1. SCSI device state monitoring...
If you go that way, as far as I know the PVE ISO installer can't put the system on an iSCSI LUN, so people usually install plain Debian there first (its installer can log into the target) and add Proxmox on top. Also keep the boot NIC out of...
I am trying to use the UI to set up some backups but I can't work my way through it.
I have an unused partition, /dev/sde3 which is formatted as xfs but is not mounted, used or passed through anywhere. As it has 9TB of space, I was wondering...
Hi CS,
I came across your thread from last December about finding an SRM equivalent for your VMware → Proxmox move. Did you land on something?
I ask because I'm the founder of KVMDR (kvmdr.ai) , and your thread is almost word-for-word why we...
Hi everyone,
I am troubleshooting recurring hard system freezes on my Proxmox VE node during heavy local AI workloads (Ollama/LLM inference) and would appreciate any insights into potential kernel, BIOS, or PCIe/chipset bottlenecks.
Symptoms...
Aaand I found the issue in my case: For some reason the "check certificate" stuff replied with "everything OK" when in fact there was some other certificate fingerprint pinned in the config.
I just needed to remove the fingerprints and it...