I was hoping this would resolve the PDM connection between my 8 nodes and PDM vs 9, all 9 work but 8 throw this 1006 error as well, turns out this doesn't really resolve it for the 8, I know upgrading will but I was hoping that wasn't the...
Greetings,
I am retired, long time computer hobbyist with a new toy, limited budget and time...
I am new here and new to ProxMox. I have an Intel NUC8 to use as a homelab/Home Assistant box.
Proxmox is up and running with a static IP. I have...
All the enterprise SSD manufacturers appear to state that their drives acknowledge the write once the data is in PLP-protected DRAM and this isn't a setting that can be changed. Even manufacturers such as Dell/IBM/HPE where they could be running...
Yeah, that makes sense, because when using it that way, the risk of data loss would be too high without PLP. Nevertheless, the benefits come from DRAM and how it is used, not from PLP. PLP is simply necessary to use DRAM that way without risking...
Da ist dann aber etwas krumm. Ein 9er pve läuft unter trixie und nicht unter bookworm. In der GUI mal die enterprise-sources deaktivieren und die no-subscription quelle hinzufügen, falls es keine subscription gibt. Dann erneut apt update && apt...
Samsung Pro and similar with DRAM but not PLP don't use the DRAM for a write cache, so no, those "benefits" I mentioned aren't available.
A consumer SSD typically dynamically allocates some of its NAND as SLC for faster writes. That is why a...
the (previously linked) ISO files there are likely malicious, please only download ISO images from our website/CDN!
https://pbs.proxmox.com/docs/installation.html#prepare-installation-medium
Again, it's the onboard DRAM, not PLP, that allows for the benefits you mentioned. It's just that practically all enterprise-class SSDs with DRAM also come with PLP.
In case that wasn't clear in my previous post: Of course, there are also SSDs...
I'm also hoping for some help. I'm experiencing the same issue. I think it started with 9.2.24. The system freezes completely, and the only solution is a hard reset. I have two nearly identical hosts, but only one has been exhibiting this...
All the enterprise SSD manufacturers appear to state that their drives acknowledge the write once the data is in PLP-protected DRAM and this isn't a setting that can be changed. Even manufacturers such as Dell/IBM/HPE where they could be running...
No, with on-board DRAM the data lands in DRAM, and PLP is there to mitigate the risk of losing that data in the event of a sudden power loss. ;)
That's actually a pretty bad example, because there are quite a few prosumer drives that perform...
I mount the hard drive to a directory via /etc/fstab, and the disk format is EXT4. This way, changing the order of the hard drive data cables will not affect the directory mounting of the hard drive. The hard drive contains only test virtual...
Kingston DC1000B has capacitors for PLP:
https://www.kingston.com/datasheets/sedc1000b_us.pdf
https://www.storagereview.com/review/kingston-dc1000b-ssd-review
Information on why they use both "hardware-based" and "firmware-based" PLP from...
The arch and debian wiki recommend against continous trim, sadly with no further explanation except freezes on old sata-hardware: https://wiki.archlinux.org/title/Solid_state_drive#TRIM
Does anybody here has an idea what woukd be a safe default?
Kingston DC1000B has capacitors for PLP:
https://www.kingston.com/datasheets/sedc1000b_us.pdf
https://www.storagereview.com/review/kingston-dc1000b-ssd-review
Information on why they use both "hardware-based" and "firmware-based" PLP from...