Latest activity
-
OOnslow replied to the thread Installation Errors Out Randomly.Hi, I advise running Memtest for a good couple of cycles. Successful installations in the past don't guarantee that the hardware is in working order now. This applies to RAM as well. I have experienced myself RAM modules running properly in PCs...
-
Rrdwsdw1 replied to the thread How migrate from IBM Tivoli / Spectrum protect to PBS?.I am just now seeing this but thought I would share some information since I have extensive experience with Spectrum Protect. SP does not back up data in a native file format and there is no officially supported way to migrate from SP to PBS...
-
OOnslow reacted to abied-charreton's post in the thread pve-firewall log: "value does not look like a valid IP address or CIDR network" with
Like.
Okay, thanks for confirming. This is a supported configuration, however there is a bug in how pve-firewall builds the ARP filter from those IPSets. Alias members are not resolved, which aborts the generation of all ebtables rules for the guest... -
Hhetmansoftware replied to the thread Proxmox Storage Recovery Challenge: Help Us Design a Realistic Data Loss Experiment.Thank you for the suggestions! Unfortunately, I don’t have enough hardware available to build and test a Proxmox cluster, so I’ll focus on a single-node setup for this experiment. However, the idea of virtualizing the environment and using...
-
KKingneutron reacted to leesteken's post in the thread Proxmox Storage Recovery Challenge: Help Us Design a Realistic Data Loss Experiment with Like.
This is not recommended for running VMs on, and therefore not realistic, according to the community: https://forum.proxmox.com/threads/fabu-can-i-use-zfs-raidz-for-my-vms.159923/
-
UdoB replied to the thread Proxmox Storage Recovery Challenge: Help Us Design a Realistic Data Loss Experiment.While I do not run large clusters but only a few smaller ones I see some additional failure sources - random thoughts: is it a cluster or a single machine? For a cluster you may inject network errors/outages I am not sure how to emulate Ram... -
JJohannes S reacted to celemine1gig's post in the thread MARVELL 9230 und VT-d - gibt es dafür eine Lösung? with Like.
Mit seinem Hinweis hat Bu66as wohl recht. Ich persönlich würde es aber noch davon abhängig machen wie lange ich die Teile noch einsetzen will. Wenn es nur drum geht das auf die Schnelle und absehbar lauffähig zu bekommen, mit dem Wissen es in ca...
-
UdoB reacted to leesteken's post in the thread Proxmox Storage Recovery Challenge: Help Us Design a Realistic Data Loss Experiment with Like.
This is not recommended for running VMs on, and therefore not realistic, according to the community: https://forum.proxmox.com/threads/fabu-can-i-use-zfs-raidz-for-my-vms.159923/
-
Wwaltar reacted to UdoB's post in the thread We accidentally install proxmox os on VM pool with Like.
Hello rmaxhost, I must admit that I probably do not understand what you're asking, sorry. When you install PVE from the installation .iso (usually from an USB stick) you can select ZFS and create a mirror, utilizing those two S3610. That's fine...
-
Hhetmansoftware replied to the thread Proxmox Storage Recovery Challenge: Help Us Design a Realistic Data Loss Experiment.Thank you for the feedback and the reference! I’ll take this into account when designing the test environment.
-
UdoB replied to the thread pct enter not passing $TERM.Sorry, I just wanted to mention that one ;-) Every administrator has a separate account, right? If not: how could you tell who made that big mistake last night? ;-) (( In my $dayjob we are utilizing ssh with forced key-only login and sudo logs...
-
UdoB replied to the thread We accidentally install proxmox os on VM pool.Hello rmaxhost, I must admit that I probably do not understand what you're asking, sorry. When you install PVE from the installation .iso (usually from an USB stick) you can select ZFS and create a mirror, utilizing those two S3610. That's fine...
-
PProximoxi20 reacted to Bu66as's post in the thread Nach Update 7.0.14-23-pve Fehler: activating LV 'pve/data' failed: Check of pool pve/data failed (status:64) with Like.
Laut deinem lvs -a pve ist der Pool nur inaktiv (twi---tz--), repariert ist da noch nix. Was bei lvconvert --repair pve/data rauskommt, fehlt noch, poste mal bitte die komplette Ausgabe. Danach lvchange -ay pve/data oder einfach rebooten. Kommt...
-
PProximoxi20 reacted to Bu66as's post in the thread Nach Update 7.0.14-23-pve Fehler: activating LV 'pve/data' failed: Check of pool pve/data failed (status:64) with Like.
Hallo @Proximoxi20, deine VG heißt pve, nicht data. data ist der Thin-Pool darin, deshalb laufen vgchange -ay data und lvs -a data ins Leere. Die Config-Dateien aus deiner Liste zurückzuspielen bringt hier auch nix. /etc ist ja intakt, kaputt...
-
PProximoxi20 replied to the thread Nach Update 7.0.14-23-pve Fehler: activating LV 'pve/data' failed: Check of pool pve/data failed (status:64).ok. Die komplette Ausgabe: ------------------------------------------------ root@proxmox-nuc7:~# lvs -a pve LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert data pve twi-aotz-- 794,30g...
-
-
NnabbyBlue posted the thread Proxmox in vlan setup - Subnet issues in Proxmox VE: Networking and Firewall.Hi I appolagise if i am in the wrong place. I was torn between here and installation/configuration. I have seen a lot of posts about changing the ip address of your proxmox setup and to be honest the web gui and cli both seem to work fine. I had...
-
KKlausKabul replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Similar symptoms, debian main. Tracking here to see whats going on.
-
Xxybo replied to the thread Proxmox VE 9.2 host randomly hard-freezes with no logs or errors (MSI X299 / i9-7920X).no, not sure about that RT USB card, but, can you remove it and assign in /etc/network/interface your primary bridge(vmbr0) to use intel onboard nic so you can eliminate RT as cause of this problem.
-
AAlmanAchim replied to the thread noVNC-Konsole funktioniert bei keiner VM.@Bu66as @micneu danke euch für die Tipps. Ich habe es gerade von meinem Jumphost via firefox versucht und Tatsache von dort funktioniert es: Was aber nach wie vor komisch ist, von meinem Rechner von wo novnc bei node01 nicht funktioniert...
-
-
Hhetmansoftware posted the thread Proxmox Storage Recovery Challenge: Help Us Design a Realistic Data Loss Experiment in Proxmox VE: Installation and configuration.Hi! First, a quick disclosure. I'm one of the developers at Hetman Software, a Ukrainian company that has been developing commercial data recovery software for over 15 years. I hope this doesn't come across as self-promotion. I'd like to propose...
