Latest activity
-
abied-charreton replied to the thread Proxmox VE 9.2 cluster loses Corosync/KNET connectivity to both remote nodes when starting a VM over LACP/MLAG.Hey, what NIC models are nic4 and nic6? And which firmware versions do they currently run (ethtool -i nicX)? -
Hhennings posted the thread [SOLVED] Bei NFS-Einbindung: TASK ERROR: EPERM: Operation not permitted in Proxmox Backup Server (Deutsch/German).Wir haben zwei PBS (PBS-01 und PBS-02) im Einsatz. Beide greifen auf Speicher zu, der von zwei unterschiedlichen Synology NAS (NAS-01 und NAS-02) per NFS bereitgestellt wird. PBS-01 mit NAS-01 funktioniert einwandfrei. Der NFS-Speicher wird von...
-
Ttschmidt replied to the thread HA Node Affinity requirement.My solution was to not add the monitor node to the cluster and instead manually run a qdev + ceph mon on it.
-
BBu66as reacted to UdoB's post in the thread Willkommen im deutschsprachigen Proxmox VE Forum! with
Like.
Nein, sorry - das ist ein fundamentales Missverständnis. Ein Container verwendet den Kernel des Hosts, eine VM verwendet immer einen eigenen. Vergleiche der beiden Technologien lassen sich zuhauf finden, ich kann das hier nicht alles wiederholen... -
Lloste87 replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Yes, confirmed 7.0.14-22 works fine. Here my experience: 7.0.14-16 - FW 223.0.161.0 >> Working 7.0.14-20 - FW 223.0.161.0 >> NOT Working 7.0.14-20 - FW 234.1.124.0 >> NOT Working 7.0.14-20 - FW 237.1.148.0 >> NOT Working 7.0.14-22 - FW...
-
Stoiko Ivanov reacted to ManuS's post in the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve with Like.
I confirm too, all is working fine with 7.0.14-22 Thank you -
BHabe mal weiter geforscht. Der in Brave integrierte PW-Manager bietet partout nichts an. Keepassxc v2.7.12 kann das nach ein wenig fummeln nun plötzlich.
-
dakralex reacted to Herzen's post in the thread HA Resource Agent Triggers Shutdown on Stopped VM during Snapshot Backup, Causes "VM is locked (backup)" Error with Like.
I don't see any “error” either, but it might be a useful hint for the developer to add an ignore condition for this specific and fairly common case. This behavior triggers a frightening, blood red alarm that could scare new users or cloud... -
dakralex replied to the thread HA Resource Agent Triggers Shutdown on Stopped VM during Snapshot Backup, Causes "VM is locked (backup)" Error.Thanks for the report! As already said, this does show that the HA stack does do its work right (that is, checking whether a guest is stopped and if not doing so). In corner cases, e.g. if a VM is stuck in the locked state, this could pinpoint...
-
Hhnoack posted the thread Acronis Backup does not see all VM running on Proxmox in Proxmox VE: Installation and configuration.Hi everyone, I'm not sure if I am in the right place, but let's try and see if anyone here has had the same issue already. I'm using Acronis Cyber Protect for the backups of my virtual machines and it works pretty stable. With the latest driver...
-
-
BBu66as replied to the thread sparsame Hardware.Ein paar Sachen, die man im Forum immer wieder sieht, @Supaman: Die I226-V NICs in vielen günstigen N100/N305-Boxen mit Link-Drops, solange ASPM aktiv ist. Workaround ist dann meist pcie_aspm=off oder ASPM im BIOS aus, und damit ist der...
-
Maximiliano replied to the thread Single flapping corosync link caused a node to fence itself. Is knet link_mode active the right fix?.Hello, Can you please share your network interfaces configuration and corosync configuration? -
Ddamian.tomey posted the thread Proxmox VE 9.2 cluster loses Corosync/KNET connectivity to both remote nodes when starting a VM over LACP/MLAG in Proxmox VE: Networking and Firewall.Hi, I am troubleshooting an intermittent Corosync/KNET connectivity problem in a new 3-node Proxmox VE cluster. The issue is reproducible when starting a VM on node 1. At that point, nodes 2 and 3 become unavailable in the Proxmox GUI, and...
-
MManuS replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.I confirm too, all is working fine with 7.0.14-22 Thank you
-
BHey, I have the same BIOS as @mkelle . I disabled Intel SpeedStep and Intel Speed Shift and it helped for my random reboot. But then I investigated it a bit more. SpeedStep is the old tech, while Speed Shift is the newer one. I looked at the CPU...
-
SSupaman replied to the thread sparsame Hardware.Sowohl ich als viele meiner Bekannten haben mit der China Hardware keine negativen Erfahrungen gemacht. Es läuft einfach - wenn dem anders wäre würde ich keine Empfehlung aussprechen. Was mich stört sind pauschale diffuse Aussagen oder Warnungen...
-
fiona replied to the thread Debian guests freeze after ~3 days on PVE 9.2.21 / kernel 7.0.2-6-pve, host unaffected, no logs before hang.Hi, additionally to what @fabian said, the host's journal from around the time of the issue might also be interesting. -
fiona reacted to fabian's post in the thread Debian guests freeze after ~3 days on PVE 9.2.21 / kernel 7.0.2-6-pve, host unaffected, no logs before hang with Like.
1. please try with the most recent kernel version 2. provide pversion -v 3. provide the VM configs
-
L@lubosr Many thanks for the analysis. Good in the sense it is not an LXC specific issue!
-
BBu66as reacted to AndrwHmmr's post in the thread Was mache ich jetzt nach dem Update auf Ceph 20.2.4 with Like.
Wenn er das cephFS in die VMs mounted mit dem Kernel Client hat das sehr wohl was mit den VMs zu tun. Wenn der Kernel der VMs aes256k nicht unterstützt kann die insecure aes auth method nicht deaktivert werden. Das geht aus dem OP nicht ganz...
