Latest activity
-
Ccorncobble reacted to randy3k's post in the thread Running Docker on the Proxmox host, not in VM / CT with
Like.
Alternatively, we could prevent docker manipulating `iptables` by modifying `/etc/docker/daemon.json` { "iptables": false } Docker will fallback to use userland proxy to perform port forwarding when iptables is disabled. Though note that... -
Ss.haigh reacted to iklesov's post in the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve with Like.
Test result for 7.0.14-22~bnxt-test1 on Intel (HPE DL360 Gen11, BCM57412, NIC firmware 237.1.141.0): No Fatal firmware reset event, no TX timeouts and no DMAR faults since boot. On -20 the first crash came 20–25 s after driver init, on every...
-
Ttomservo replied to the thread device-mapper: thin: Data device (dm-2) discard unsupported: Disabling discard passdown.You can see if the RAID controller is telling the kernel that discard is supported. Run this to see how many bytes it says can be discarded in one pass cat /sys/block/sdz/queue/discard_max_hw_bytes Replace sdz with your actual device. If this...
-
Llubosr replied to the thread NFS server side copy stopped working.@keeka I tested both questions. Bare metal: yes, same problem. I ran the NFS server directly on the PVE node (nfs-kernel-server on the host, exporting the same two ZFS datasets, no container). The copy between the exports hangs the same way. The...
-
-
KKingneutron reacted to santiagobiali's post in the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data? with Like.
Just detach it: zpool detach Swissbits /dev/disk/by-id/<disk-you-want-to-remove>
-
Pph0x replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.The cluster is in the same state as before, there's nothing to worry about. Have you tried adding the hostname after the fqdn in /etc/hosts? That's good practice after all and might help you with this problem.
-
Ddeebsr replied to the thread NFS server side copy stopped working.Just curious if the 7.0.14-22 version that is sitting int he test repo fixes this issue?
-
DHi keeka, Could you confirm with uname -r on the host that it runs 7.0.14-20-pve? I could reproduce this in a lab with a setup like yours: a privileged Debian 12 CT exporting two ZFS datasets, and a Debian 13 client mounting with vers=4. With...
-
Rreseaux OSB replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.Hello, I am experiencing a similar issue with the Ceph update procedure on two production clusters. I have not been able to complete the migration, apparently because of the way FQDN hostnames are handled. On these clusters, the nodes have...
-
Ggfngfn256 replied to the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data?.Just to clarify; I believe that by /dev/disk/by-id/<disk-you-want-to-remove> , the poster refers to the non-working disk, so in your case I imagine that is the second nvme in that image above. This should cause the pool to be left with the single...
-
Hhummmingbear replied to the thread Cannot login with 2FA enabled.I have this same issue. Running PVE 9.2.21 with 2FA and 1Password. If I have 1PW autofill my username/pw are accepted, but I'm brought back to the 2FA input form. If I enter 2FA manually it accepts it and I see all my LXC's load, but the 2FA...
-
-
Ssantiagobiali replied to the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data?.Just detach it: zpool detach Swissbits /dev/disk/by-id/<disk-you-want-to-remove>
-
MYes, but IMO this also means that the swapped memory on the VM will actually not be written (immediately/ever) to physical disk on the host but kept in RAM. This way, the decision to actually swap to physical disk (which may cause hiccups on the...
-
Jjbattermann posted the thread [SOLVED] Turn 2-disk ZFS mirror into Single Disk setup without loosing data? in Proxmox VE: Installation and configuration.Hi there, quick Q: I have been running a small homelab machine with Proxmox on it for the last couple of years and ran it with two additional quasi data SSDs in a ZFS mirror setup. One of those SSDs have failed and, given RMA/warranty not being...
-
-
Ccebo29 replied to the thread Thin pool is full.Ja habe ich auch gerade gesehen. Die Änderung hat wohl gestern statt gefunden. Sehe aber keine Änderung nach meinem Problem. Wie auch immer, es funktioniert ja jetzt. Ich danke euch vielmals für eure Zeit und Hilfe.
-
EEAMUNDSON replied to the thread In a 3-node Proxmox Cluster, when one node is rebooted, VMs on other nodes experience momentary packet loss..OK, an update on this issue. I also opened a Proxmox support ticket on the intermittent packet loss problems, which upon further investigation happen even when no server is rebooting. Other things I did to troubleshoot this: 1. I enabled port...
-
Ccebo29 replied to the thread Thin pool is full.Ok, ich habe das Script jetzt nochmals gestartet. Komischerweise läuft es jetzt durch. Verstehe jetzt nicht woran das lag, außer es lag am Scrip und es wurde im Hintergrund geändert.
-
Ccebo29 replied to the thread Thin pool is full.Ja die nfs mounts habe ich über fstab eingebunden, und den smb Mount über die Proxmox Oberfläche.
-
Ddavidsg replied to the thread Unable to use vTPM on Ceph when min-compat-client too new for krbd even when krbd disabled.Fixed with the patch below. I'll try to submit this officially once I figure out how to sign the CLA, it looks like I'm meant to print it, sign and scan back in? I have neither a printer nor a scanner, so that's difficult. I sent an email to ask...
