Latest activity
-
dcsapak replied to the thread Proxmox Data Center Manager Resource View.no, not yet. but feel free to open an enhancement request here: https://bugzilla.proxmox.com i think it makes sense to have maybe a 'table-like' resource view, similar to what the tree view widget + usage graphs could be -
IInfotelecom posted the thread PVE 9.2.5 – Intermittent segfaults, cpuidle/RCU warnings and previous kernel panic on i7-14700K / ASUS B760 in Proxmox VE: Installation and configuration.Hi, We are troubleshooting an intermittent stability issue on a production Proxmox VE host and would appreciate some advice before changing hardware or firmware. System: Proxmox VE 9.2.5 Current kernel: 6.11.11-2-pve Newer 7.0.14-6-pve is...
-
CCRCinAU replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.For the record, did you install firmware 38.11.70.00 from: https://www.dell.com/support/product-details/en-au/product/poweredge-r750xa/drivers?driverid=F2K1J&driveros=naa&ld=F2K1J Your logs mention Firmware 236.1.167.0 pre-update. Annoyingly...
-
Stoiko Ivanov replied to the thread DKIM Signatur Zeitstempel/Ablaufdatum.Wurde seinerzeit nicht implementiert - koennte aber hinzugefuegt werden - bitte einen enhancement-request (auf Englisch) unter https://bugzilla.proxmox.com dafuer erstellen Danke! -
Xx2on replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.Same problem with 2.5GBE PCI-E RTL8125 Chipset. Pinned to 7.0.14-19 which works fine.
-
Xx2on replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Same problem with 2.5GBE PCI-E RTL8125 Chipset. Pinned to 7.0.14-19 which works fine.
-
Ggfngfn256 replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.According to this site - It would appear that the MetaComputing AI PC with Framework Laptop 13 is capable of UEFI booting, so I imagine you should be able to install. Please note I have NO personal experience with this MetaComputing AI PC with...
-
Mmy1770 posted the thread Proposal: Graphical visualization of network configuration for a node/cluster in Proxmox VE in Proxmox VE: Networking and Firewall.Dear developers and community members, I would like to propose a feature that I believe would be useful to many Proxmox VE administrators: graphical visualization of network interfaces and their connections for a node and cluster. Problem...
-
Ggeletron replied to the thread PVE 9 / kernel 7.0.14-12-pve - silent warm resets on Supermicro Hardware.This is the server we have https://persy.com/en/ss-21419 It has the following hardware: Mob: 4677 DP; Intel C741, https://www.supermicro.com/en/products/motherboard/x13dei 2 x Intel CPU Xeon Silver 4509Y 2 x 32GB DDR5/5600MT/s 2x HDD 8TB...
-
Mmy1770 replied to the thread LAG / VLAN on node setup.Open feature request: Bugzilla #2164 There is currently no information on specific timelines for including this functionality in the distribution. It is known that a corresponding patch was proposed on the pve-devel mailing list, but it has not...
-
MManuS replied to the thread Proxmox VE 9.2.21 - BCM57412 bnxt_en network failure after upgrade to kernel 7.0.14-20-pve.Thank you Dave, I'll not search anymore, pin kernel 7.0.14-19, and I'll wait for futur kernel release. Regards
-
VictorSTS reacted to bbgeek17's post in the thread [TUTORIAL] PVE 9.2 ARM64 on ASUS GX10 (GB10): 6 GB/s of NVMe/TCP out of the box, 29 GB/s after two kernel flags with
Like.
One more GX10 post, the last one for now. After battling the black screen, the hard resets and the power cap, we were finally able to see what this box and PVE on arm64 can do. Out of the box, the kernel initiator managed NVMe/TCP reads at 6.3... -
Stoiko Ivanov reacted to CRCinAU's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
I know that this is for a slight different model network adapter, however this may be useful: https://forum.proxmox.com/threads/proxmox-ve-9-2-21-bcm57412-bnxt_en-network-failure-after-upgrade-to-kernel-7-0-14-20-pve.186749/ In that thread, the...
-
gurubert reacted to VictorSTS's post in the thread Ceph OSDs not being able to be configured in fully routed Environment with Like.
What we do is simply edit ceph.conf once the first MON has been provisioned to move both Public and Cluster networks from /32 to /24 (sed -i 's/\/32$/\/24/g' /etc/pve/ceph.conf), then you can keep provisioning Ceph as usual. Edit: forgot to... -
Bbaas54 replied to the thread Slow/hanging Proxmox consoles after upgrade to 9.2.20 (from 9.2.4).Thanks for pushing on this — turned out to be a good lead, though not quite Raptor Lake-S. Some more detail: This is a 5-year-old white-label mini-PC (sold as "FANPEEC" on Amazon.de, bought 10/2021) — one of the many generic Chinese NUC-clone...
-
RRobertKih replied to the thread WARNING: drivers/iommu/dma-iommu.c:1953 at dma_iova_link.Looks like it's in. https://github.com/proxmox/pve-kernel/compare/1b2487210d5c4f07ed45b70550aded162318fb72...50593134a85062380a9e90ac6f5d2ba4c8d537ac
-
Ssgw replied to the thread Shared LVM gewünscht: FC-SAN?.Nein: Das NAS ist bereits bei mir, wird noch vor den PVEs online sein dort.
-
MMandre replied to the thread Lost connectivity with external storage after upgrade.Thank you. We will be testing this shortly. I will provide final feedback on the results
-
NNemesiz replied to the thread [TUTORIAL] PVE 9.2 ARM64 on ASUS GX10 (GB10): 6 GB/s of NVMe/TCP out of the box, 29 GB/s after two kernel flags.Can you tell me what kind of dashboard this is?
-
JJohannes S replied to the thread Shared LVM gewünscht: FC-SAN?.Dann bleibt ja nur der Server, wenn der Cluster vor Inbetriebnahme des BAS laufen soll. Ohne qdevice würde ich keinen zwei-Knoten-Cluster betreiben.