Latest activity

What's new Featured content New posts New profile posts Latest activity
  • T
    Torben Andresen replied to the thread PVE performance und HW.
    Was bei Datev Updates immer viel bringt, ist das deaktivieren des Virenscanners auf dem DTV und den Clients. Hast du auf dem Host bzw. in den VMs mal die Prozesse in der Zeit beobachtet, fällt da einer auf?
  • mariol
    mariol reacted to meyergru's post in the thread PVE performance und HW with Like Like.
    Das Einzige, was ich daran eventuell ändern würde, ist die Ausstattung mit Compute und RAM - eine Anwaltskanzlei sollte sich das erfahrungsgemäß leisten können. ;-)
  • mariol
    mariol reacted to Supaman's post in the thread PVE performance und HW with Like Like.
    Für solche Setups ist ein Terminalserver i.d.r die bessere Wahl, frisst weniger Ressourcen und ist leichter zu administrieren, weil primär der TS aktualisiert werden muss und alle User dann die gleiche Instalaltion zur Verfügung hat.
  • M
    matteu replied to the thread SMTP with Microsoft 365.
    Thanks for your answer. That means the only way today for it to work is to get an SMTP relay... Or just not use SMTP notifications !
  • J
    janus57 replied to the thread SMTP with Microsoft 365.
    Hi, No we use simple SMTP through our SMTP relay, as far as i know pve or pbs don't have OAUTH setting. Best regards,
  • A
    ajin replied to the thread VM becomes unresponsive during Veeam backup.
    The Hot-Add vs NBD results are probably the most useful clue here. If NBD keeps the VM responsive while Hot-Add drives I/O down to ~100 KB/s and causes soft lockups/RCU stalls, I’d be looking very closely at the Hot-Add path between Veeam, QEMU...
  • M
    matteu replied to the thread SMTP with Microsoft 365.
    @janus57 It's for professional setup so M365 enterprise account and not personnal one You can use OAUTH natively with proxmox to send mail ? It's what I would like but I totally ignore how to
  • J
    janus57 replied to the thread SMTP with Microsoft 365.
    Hi, It's not working anymore, M365 enforced OAUTH authentication (or at least it's what we have seen with business accounts with our clients). Since then we either use OAUTH or a SMTP relay (create with proxmox mail gateway). Best regards,
  • J
    janus57 replied to the thread Outgoing Emails Delivered to Spam.
    Hi, You can if this IP address is attached to a dedicated server (or VPS). Exemple in my case : Best regards,
    • 1790586614345.png
  • F
    flax8334 reacted to Erik Horn's post in the thread Ceph OSDs not being able to be configured in fully routed Environment with Like Like.
    The proxmox helper scripts don't handle multiple ceph networks. They only expect to find one in the configuration file and will throw that error when doing certain operations. When creating OSDs, we work around it by removing all the networks...
  • F
    flax8334 reacted to shanreich's post in the thread Ceph OSDs not being able to be configured in fully routed Environment with Like Like.
    Currently, using a CIDR that contains *all* IPs that are part of the cluster is the only way. We had some internal discussion on how to lift this restriction though. You can set the CIDR manually via pveceph, e.g.: pveceph init --network...
  • fiona
    fiona replied to the thread qcow2 file is bigger as hdd config.
    How does it look like for the copied image resulting from the convert operation?
  • fiona
    fiona reacted to fabian's post in the thread losing dirty-bitmaps during Live Migration with Like Like.
    please provide the configs: - /etc/pve/storage.cfg - VM config as well as logs: - any tasks logs concerning the VM since it was started on the source - the migration and start task logs if you can easily reproduce it with a test VM, you could...
  • A
    andrej_ replied to the thread TASK ERROR: timeout waiting on systemd.
    Hi fiona, thanks for your post, I´ve solved the problem through this: Proxmox
  • fiona
    fiona reacted to CRCinAU's post in the thread QEMU 11.1 available on pve-test as of now with Like Like.
    Tested this on two Ryzen based nodes in a cluster. No issues detected so far. I did change the version manually on a Windows guest, that seemed to boot and operate ok. I did note however that I had to install the updates on both nodes in the 2...
  • fiona
    fiona replied to the thread TASK ERROR: timeout waiting on systemd.
    Hi @manu007 and @andrej_, please share more information similar to what @davispuh did. You can try systemctl reset-failed for the scope and/or stuck unit, but it would be good to check how it's stuck first.
  • shanreich
    shanreich replied to the thread VM VPN Client network traffic not working when Firewall enabled on Datacenter.
    This sounds like a potential conntrack issue. For testing purposes, does setting nf_conntrack_allow_invalid in the host firewall configuration work?
  • shanreich
    shanreich replied to the thread Ceph OSDs not being able to be configured in fully routed Environment.
    Currently, using a CIDR that contains *all* IPs that are part of the cluster is the only way. We had some internal discussion on how to lift this restriction though. You can set the CIDR manually via pveceph, e.g.: pveceph init --network...
  • B
    baas54 posted the thread Slow/hanging Proxmox consoles after upgrade to 9.2.20 (from 9.2.4) in Proxmox VE: Installation and configuration.
    Symptom After upgrading to Proxmox VE 9.2.20 (September 24, from 9.2.4), LXC/VM consoles in the web interface sometimes failed to start (termproxy ... failed: exit code 1, failed waiting for client: timed out), and overall interaction (console...
  • gurubert
    gurubert reacted to Francois Baillargeon's post in the thread ceph public MTU from 1500 to 9000 with Like Like.
    Honestly, it's more trouble than worth, we had zillions of times when "Configured correctly " did not pass pass the ping -M do -s 8972 [destinationIP]test All moderns switch ASICS can do line speed with regular frames, and most NICs have...
Show older items
Top Bottom
Back