Latest activity
-
Jjdancer replied to the thread Kernel 7.0.14-14-pve: immediate reset + CPU machine check when igb loads on I350 (Dell XC730xd) — 6.14 unaffected.I don't enable SR-IOV on the 13th-gen Dells at work in production. Running without issues. I do enable X2APIC and I/OAT DMA though. All servers are running latest firmware (BIOS, NIC, iDRAC, etc, etc).
-
Jjdancer replied to the thread recommended 100 Gbit/s NICs for Ceph.At work, the order of precedence for reliability is: 1) Mellanox (CX-6) 2) Intel (E810) 3) Broadcom (NetXtreme/Thor)
-
CCRCinAU replied to the thread Kernel 7.0.14-14-pve: immediate reset + CPU machine check when igb loads on I350 (Dell XC730xd) — 6.14 unaffected.Thought I'd just chip in here too.... I run a Dell R730 in a colo facility - it hasn't had any issues with PVE9 or any of the release 7.0.x kernels. However, my system has the following network adapters installed: I am using 2 x 10Gb SFP+...
-
-
CCRCinAU replied to the thread What is proper way to make PVE host a dhcp client in 9.2 ?.I'll be honest - I can see the idea for using DHCP to configure everything - but I can also see it being a gateway for pain. I'm not sure if you're looking at running more than one PVE host in a cluster - or this is a single server operation -...
-
JJ-Rod replied to the thread How to change the number of cores (and memory) allocated to Ceph OSDs?.Thanks for the reply. I did experiment with krbd, as well as partitioning the PCIe SSDs (Intel DC P3700) for multiple OSDs, and also disabled compression, among a host of other tweaks. I really never could exceed around 160MBytes/sec sustained...
-
CCRCinAU replied to the thread Outgoing Emails Delivered to Spam.Another thing to check - your reverse DNS entries in your first post seem to mention pmg01 and pmg02. From querying external DNS servers for your screenshotted PMG hosts, I see that pmg01 does not seem to have a reverse DNS entry for its IP...
-
Sshodan replied to the thread What is proper way to make PVE host a dhcp client in 9.2 ?.Yes I understand the orthodox network position, I too was there 10 thousands years ago before dhcp even existed. It feels scary to relinquish manual control to an unreliable untested machine. It feels empowering to give numbers to things and know...
-
Mmatteu replied to the thread SMTP with Microsoft 365.Hello @SteveITS and thanks for your answer. Unfortunately this will not be possible :( Proxmox doesn t have on the roadmap to integrate modern authentication for the notification ? I know for veeam I use it.
-
AAceMilo replied to the thread Major issues after upgrade 8-9.It DOES see the sata controller as well but it just will not use it. I'm using seabios (default). Does that need to be changed to uefi? Edi: if I select uefi it wants more storage to store it. I tried enabling viommu and that did not work...
-
AAceMilo replied to the thread Major issues after upgrade 8-9.I don't NEED the gpu. I do need the sata controller and nic. I'm not sure what iommu is. When I run the lspi I do see the gpu in the list.
-
AAceMilo replied to the thread Major issues after upgrade 8-9.When I do that I get the config for my vm. I do not have the network card passed through currently since I couldn't get an ip. balloon: 0 boot: order=scsi0;ide2 cores: 2 cpu: x86-64-v2-AES hostpci0: 0000:02:00,pcie=1,rombar=0 hostpci1...
-
AAceMilo replied to the thread Major issues after upgrade 8-9.OK please treat me like a child. Where do I put that?
-
AAceMilo replied to the thread Major issues after upgrade 8-9.Are you asking my to run this? Here's the result: qm config VMIDHERE { shopt -s nullglob for g in $(find /sys/kernel/iommu_groups/* -maxdepth 0 -type d | sort -V); do echo "IOMMU Group ${g##*/}:" for d in $g/devices/*; do echo...
-
BBu66as reacted to CoolTux's post in the thread Offtopic-Frage: Wie backupt ihr eure VMs und Files? with
Like.
Das ist das Prinzip von Proxmox. Die haben das so gemacht das Du ein lokales Verzeichnis beim Einrichten des Datastore als local Cache und die s3 endpoint id, welche du vorher unter Configuration --> s3 endpoints eingerichtet hast, angibst. Musst... -
AAceMilo posted the thread Major issues after upgrade 8-9 in Proxmox VE: Installation and configuration.Hi, I'm trying to upgrade my proxmox from 8 to 9. It is currently displaying it as version 9.2.2 when it boots. I cannot pass PCI devices anymore to my vms, specifically truenas. It doesn't see my network card or my disk controller. It did...
-
CoolTux replied to the thread Offtopic-Frage: Wie backupt ihr eure VMs und Files?.Mein s3 ist nicht geschützt. Ich betreibe das alles privat. -
CoolTux replied to the thread Offtopic-Frage: Wie backupt ihr eure VMs und Files?.Das ist das Prinzip von Proxmox. Die haben das so gemacht das Du ein lokales Verzeichnis beim Einrichten des Datastore als local Cache und die s3 endpoint id, welche du vorher unter Configuration --> s3 endpoints eingerichtet hast, angibst. Musst...
-
JDas Einzige, was ich daran eventuell ändern würde, ist die Ausstattung mit Compute und RAM - eine Anwaltskanzlei sollte sich das erfahrungsgemäß leisten können. ;-)
-
JWie von @ThoSo schon erwähnt, spare dir das VM/LXC-Geraffel in irgendwelchen NAS-Systemen. Ein PVE ist die Basis von VMs und Containern. Ein auf PVE virtualisiertes NAS, mit darin virtualisierten Maschinen ist ein recht abenteuerliches Konstrukt.
-
JJohannes S reacted to leesteken's post in the thread Host bootloader documentation nitpick (and about BTRFS) with Like.
Some experiences with BTRFS (for non-root, all RAID1c2 coming from ZFS mirrors, running latest no-subscription with kernel 7.0) on my single node home system (running a desktop VM with GPU and USB passthrough): The same: Check-summed redundant...
