Latest activity
-
Uuser11655 replied to the thread Any built-in method to export to a CSV or excel Spreadsheet the Summary Listing for each HOST or a overall DATACENTER Sumary?.Well Alright..glad there are smart people in this world..Thanks.
-
Bbuldamoosh replied to the thread [SOLVED] CEPH Key Migration now "Not a proper rbd authentication file error".my solution: apt update && apt full-upgade -y no reboot required...
-
cwt replied to the thread Any built-in method to export to a CSV or excel Spreadsheet the Summary Listing for each HOST or a overall DATACENTER Sumary?.For a cluster you can get all node resources with: pvesh get /cluster/resources --type node --output-format json An example for a csv export (package jq needed): pvesh get /cluster/resources --type node --output-format json | \ jq -r '... -
Uuser11655 posted the thread Any built-in method to export to a CSV or excel Spreadsheet the Summary Listing for each HOST or a overall DATACENTER Sumary? in Proxmox VE: Installation and configuration.I have looked aroung in PDM and in Proxmox VE# 9.2.2 and did not see anyway to export like the summary tab to a CSV or Excel Spreadsheet.
-
RRMaxwell72 replied to the thread SDN VLAN zone with IPAM and DHCP.Do we have any update on this? I'm needing to be able to have DHCP/IPAM working for VLAN based SDN zones, and I'm really not wanting to have to setup multiple DHCP services operating on the underlying routers of these affected VLANs.
-
Ppirulax replied to the thread Any way to isolate VMs on same VLANs/bridge?.I ended up using SDN with VNets wirth "Port Isolation" - It's kinda finnicky though, because I need to add a separate net interface for each VNet, requires a lot of configuration... But it works. My main "issue" was that separate LXCs could find...
-
A few comments about your observations: There is absolutely no "valid DNS name" requirement for a VM name in the PVE, cluster or solo. This is Ansible creator's choice, not Proxmox's. A clone creates an identical copy of a VM, resizing a disk... -
fba replied to the thread Idempotence of ansbile modules.There is an older thread about cloning with ansible: https://forum.proxmox.com/threads/problems-cloning-from-template-with-ansible.106527/ where it is also shown, that the targetid must be set to prevent Proxmox VE automatically assigning an...
-
Llucavornheder replied to the thread [PBS 4.2.5] Handling backup ownership on a PBS node that uses per-cluster namespaces when restoring a backup from Cluster A to Cluster B?.Your setup sounds quite good and what you are describing is what i would also do. The alternative would be to add the pbs a second time with the login of pve01 in the DR case.
-
bbgeek17 replied to the thread Proxmox VE 9.2 – sporadic iSCSI NOP timeouts / DID_TRANSPORT_DISRUPTED with Dell PowerVault ME5 and Intel E810.Ok @huganega , I think we've figured this out. It takes a combination of things to trigger: - A link that's "fast" (i.e., 25GbE) relative to your CPU (Skylake or Cascade Lake) - A backup load running at full queue depth - An array that doesn't... -
Eerickmelo replied to the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon.Hi all, I'm running the cephx key migration (aes → aes256k) following the official procedure in the pveceph docs, and it fails on Step 1 (rotating the shared mon. key), before touching anything else. Looking for confirmation on the safest way to...
-
-
You should by all means discuss any concerns you have with PVE directly, either with Proxmox or a reseller during the pre-sales process. There is nothing inherently impossible about changing software architecture. Whether a particular change...
-
JA few comments about your observations: There is absolutely no "valid DNS name" requirement for a VM name in the PVE, cluster or solo. This is Ansible creator's choice, not Proxmox's. A clone creates an identical copy of a VM, resizing a disk...
-
bbgeek17 replied to the thread Idempotence of ansbile modules.A few comments about your observations: There is absolutely no "valid DNS name" requirement for a VM name in the PVE, cluster or solo. This is Ansible creator's choice, not Proxmox's. A clone creates an identical copy of a VM, resizing a disk...
-
LI have different environments in my lab that I like to test, such as VMware vSphere, Microsoft Hyper-V, Proxmox VE, and various operating systems like Windows and Linux. All of them need access to ISO files, which is why I maintain a central ISO...
-
BBu66as replied to the thread Wünschenswert: Anzeige der NIC-Geschwindigkeit.Der Hinweis mit dem Repo-Wechsel ist spannend, sowas würd ich nicht gleich als Zufall abtun. Beim Umstellen auf Enterprise ziehst du dir meistens einen ordentlichen Schwung Updates rein, Kernel inklusive. Schau mal in /var/log/apt/history.log...
-
LHello everyone, I ran into the same issue many of you have faced, and I’d like to share an easy fix that worked for me. Like some of you, I store my ISO files on a NAS and mount it as an NFS export to my Proxmox hosts, but the ISO files were...
-
Tthegoggel replied to the thread BGP router-id.I use IPv6 for both underlay and overlay. I have configured the evpn in the Proxmox SDN and I run a route reflector on an Aruba switch. I have tried to attach a IPv4 address to the loopback address in addition to the IPv6 but it does not help. I...
-
Llusid1 replied to the thread [SOLVED] NFS ISO's not showing in UI.For future me, who will forget this before I need it again, here it is as a one-liner: pvesm set <storage> --content-dirs iso=/
-
Bbuldamoosh replied to the thread [SOLVED] CEPH Key Migration now "Not a proper rbd authentication file error".I've tried completely removing my OSDs, the ceph configuration, recreating everything, and restarting all of my nodes....
