Latest activity
-
Ppmarasse posted the thread 32 bits Debian bookworm guest does not start in Proxmox VE: Installation and configuration.Folks, I cant't say when it happen the fist time, but I have a Debian 12 32bits, with 3.5 Gib RAM that cannot start : But it starts when NUMA+Memory hotplug is enabled, but only 1 Gb is available... and memory hotplug seems not to be...
-
-
FFredGrekov reacted to Sviat's post in the thread [TUTORIAL] Converting a Linux Desktop PC into a Proxmox Server — Preserving Full Desktop Functionality via Native OS in LXC with
Like.
Hi, In addition to the security concerns, the option to disable swap makes this guide even more attractive to people who are looking for a bit of an “adventure.” I’m absolutely not against knowledge sharing, as long as people are aware of the... -
BBamsefar posted the thread Question: After joining a pve node to a cluster, one disc has the same name in Proxmox VE: Installation and configuration.So I have, nowdays, two pve nodes, and they are available on the same cluster, and looks like this: pve2 has - as one can see - three discs. However the one called "SamsungT7" does not exist, it is a USB disc attached to the first pve node. Or...
-
-
Sskybolt_1 replied to the thread Random crashes without logs - kdump doesn't appear to be working.Yes, I've had the latest bios on this server from the start of the issue. Unfortunately, Dell has ended further development, so it comes down to finding the right combination of hardware at this point.
-
Aalain reacted to J-Rod's post in the thread Cephx Key Migration Procedure and Ceph 19.2 Squid Going EOL Soon with Like.
Upgraded yesterday to 9.2.18 and 20.2.4, then ran through the process successfully. Relatively simple 3-node cluster. My only gripe is that in some cases it wasn't 100% clear if I should proceed, since the script didn't have the nice green PASS...
-
GG0ldmember reacted to Stoiko Ivanov's post in the thread Hash Sum mismatch in no-subscription repo with Like.
The issue should be fixed now - and de2 CDN node is again part of our network.
-
Ssebbie posted the thread Display + network drop simultaneously at boot on Dell OptiPlex 3070 suspected power issue? in Proxmox VE: Installation and configuration.My Proxmox host was running fine for 18+ days uptime, then became unresponsive while I was actively using it via SSH. Journal logs confirm this was a clean Power key pressed short → Powering off event — I manually power-cycled it after the...
-
TThomasA reacted to meyergru's post in the thread [SOLVED] io_uring on kernel 7.0.6-2-pve (PVE 9.2.3): guest disk I/O errors (EIO) + filesystem XFS shutdown with Like.
I now have seen this behavior, too, but with ZFS on the PVE host and both ext4 and ZFS on the VM guests. The machine is equipped with SSD-only, 6 NVME, 2 SATA. All of them are in three ZFS mirror pools (one with 2x NVME, one with 4 and the last...
-
TThomasA reacted to hidigoudi's post in the thread [SOLVED] io_uring on kernel 7.0.6-2-pve (PVE 9.2.3): guest disk I/O errors (EIO) + filesystem XFS shutdown with Like.
The problem is also triggered on last kernel 7.0.12-1-pve. [root@patchmon ~]# fio --name=stress-hdd --ioengine=libaio --iodepth=8 --rw=randwrite --bs=4k --direct=1 --fdatasync=8 --size=20G --numjobs=8 --runtime=1800 --time_based...
-
TThomasA reacted to hidigoudi's post in the thread [SOLVED] io_uring on kernel 7.0.6-2-pve (PVE 9.2.3): guest disk I/O errors (EIO) + filesystem XFS shutdown with Like.
Some news : I was able to reboot one of the both Proxmox host on Kernel 6.17.13-13-pve and retry the same process / same stress write test (30 minutes of stress). I confirm that there is no issue on this kernel version. So it seems to be a...
-
TThomasA reacted to hidigoudi's post in the thread [SOLVED] io_uring on kernel 7.0.6-2-pve (PVE 9.2.3): guest disk I/O errors (EIO) + filesystem XFS shutdown with Like.
I just find a way to reproduce the issue on the guest : root@zabbix :~$ fio --name=stress-write --ioengine=libaio --iodepth=64 --rw=randwrite \ --bs=4k --direct=1 --size=20G --numjobs=8 --runtime=600 \ --time_based --ramp_time=30...
-
JThis is for a commercial setup, right? And you are starting from scratch, without much experience, right? If both is true you need either an external consultant (as @LnxBil already mentioned) or a lot of time. You mentioned "DR", Desaster...
-
Proxmox Backup Server is the answer, if you want to use other backup software, please ask in their respective forums. It is also highly advised to use a Proxmox consultant for commercial best practices which also helps with implementation... -
https://proxmox.com/en/products/proxmox-backup-server/overview and https://pbs.proxmox.com/docs/ https://proxmox.com/en/partners/find-partner/explore EDIT: You are asking very broad/generic questions and give almost no context. This will only...
-
UdoB replied to the thread DC and DR Setup.This is for a commercial setup, right? And you are starting from scratch, without much experience, right? If both is true you need either an external consultant (as @LnxBil already mentioned) or a lot of time. You mentioned "DR", Desaster...
-
Jhttps://proxmox.com/en/products/proxmox-backup-server/overview and https://pbs.proxmox.com/docs/ https://proxmox.com/en/partners/find-partner/explore EDIT: You are asking very broad/generic questions and give almost no context. This will only...
-
JJohannes S replied to the thread [TUTORIAL] Converting a Linux Desktop PC into a Proxmox Server — Preserving Full Desktop Functionality via Native OS in LXC.Why? If you want to use vms on your desktop virt-manager or Virtualbox are easier to setup and use. Alternative you could use incus which can also be installed on mon-debian systems. And if you want to go full-virtualized for security concerns...
-
JJohannes S reacted to Sviat's post in the thread [TUTORIAL] Converting a Linux Desktop PC into a Proxmox Server — Preserving Full Desktop Functionality via Native OS in LXC with Like.
Hi, In addition to the security concerns, the option to disable swap makes this guide even more attractive to people who are looking for a bit of an “adventure.” I’m absolutely not against knowledge sharing, as long as people are aware of the...
-
Hhannsr posted the thread NUT Client not updating, resulting in unexpected shutdowns in Proxmox VE: Installation and configuration.Hi, I noticed an issue with running NUT Client on my proxmox host. It's not that it's not working, but rather it is not updating the state of the UPS after a calibration. So at some point the NUT Server will run a calibration and if NUT Client...
-
SSwanand replied to the thread DC and DR Setup.you have any documentation or refer link for it
