Latest activity
-
BBu66as reacted to Falk R.'s post in the thread Proxmox VE 9.2 – kompletter Host-Freeze / Hardreset nötig with
Like.
Ich habe da nicht so viel Ahnung von Customer Hardware, aber HM80 und HM90 habe ich schon oft mit diesen Problemen gehört. Komischerweise treten da die Fehler nicht auf wenn man ein nacktes Debian13 installiert. Entweder mögen die Dinger keine... -
BBu66as replied to the thread ZFS und Plattenplatz.Zum Fazit-Post: gerne, mach das. Landet früher oder später jemand mit dem gleichen Faktor hier drin und ist dann froh über die Auflösung. Und beim Namen bist du in guter Gesellschaft, das interessiert hier keinen. Noch ein Tipp: wenn du die...
-
BBu66as replied to the thread Proxmox VE 9.2 – kompletter Host-Freeze / Hardreset nötig.Zu deiner Frage, wie man bei einem kompletten Freeze überhaupt noch was rauskriegt: netconsole. modprobe netconsole netconsole=6666@<host-ip>/<nic>,6666@<ziel-ip>/<ziel-mac> und auf der Gegenstelle ein nc -u -l 6666 mitloggen, dann hast du die...
-
Aalexandrescx replied to the thread Ceph error: /dev/pve/data_tmeta: after upgrade 20.2.1 to 20.2.2.Yes, I am using cephadm, because several features I need are not available in Proxmox VE’s default hyper-converged Ceph installation. I understand that this setup is not officially supported, but it is necessary for my use case.
-
UdoB reacted to shodan's post in the thread A missing ISO file should not prevent a VM from starting, it should just be a warning with Like.
Ok thanks ! I gave my 2 cents to 4225 -
BBu66as replied to the thread RAID5 und XFS im Cluster mixen?.@oelk was ist denn jetzt aus den vier 7,68ern geworden, RAID10 oder RAID-Z2? Das sind zwei verschiedene Layouts. Bei nur 4 Platten hat Z2 gegenüber zwei Mirrors null Platzvorteil, netto liegst du beide Male bei ~15TB, dafür aber deutlich weniger...
-
Sshodan replied to the thread A missing ISO file should not prevent a VM from starting, it should just be a warning.Ok thanks ! I gave my 2 cents to 4225
-
UdoB replied to the thread PBS ZFS disk speed thoughts option.Keep in mind that the usable space will be less as ZFS uses some space "for its own". Then there is the 80%-rule: for good performance a pool should not get filled up more than 80%. Above 90% IO-operation may get really slow. (( And reaching...
-
UdoB replied to the thread PBS ZFS disk speed thoughts option.Just nitpicking - to avoid establishing "wrong" terms: Each of those groups (of three) disks result in a vdev. Any (practical) number of vdevs may be put into one pool. All vdevs in one pool are striped.
-
Nnikhilbhalwankar posted the thread ZFS Datapool Error - How to Access Data from Virtual Machine Disk from Proxmox? in Proxmox VE: Installation and configuration.Hi, I have a JBOD server with below configurationn -> - I have two datapools. Each are under RAID-5 - Proxmox VE is installed on the server and these two RAID-5 datapools are attached to it as ZFS shares DATAPOOL-1 and DATAPOOL-2. - TrueNAS 13...
-
UdoB reacted to BassT's post in the thread Unofficial updater script for Proxmox VE (HOST / LXC / VM ) with Like.
**Ultimate Updater v5.1.2 – Hotfix released** A small but important hotfix release for Ultimate Updater 5.1. ### What’s fixed * fixed the self-update path for existing v5.0 installations * corrected release archive handling during...
-
BBassT replied to the thread Unofficial updater script for Proxmox VE (HOST / LXC / VM ).**Ultimate Updater v5.1.2 – Hotfix released** A small but important hotfix release for Ultimate Updater 5.1. ### What’s fixed * fixed the self-update path for existing v5.0 installations * corrected release archive handling during...
-
-
JIch habe die .302er mal in geklonten VMs getestet, Server 2022 und 2025. Auf zwei Systemen laufen u.a. SQL-DBs. Bisher habe ich in diversen Last-Szenarios (Sql burn-in bei parallelem Schreibzugriff und gleichzeitig vielen requests via Netzwerk)...
-
AAkUsP replied to the thread Dell R740XD.I runn newest proxmox on r740xd. Use R740xd in both VE and PBS. Boots fine from either idrac mount and usbdrive made by Rufus 4.xx I say update to latents bios and idrac with lifecycle, Then totaly reset it.
-
AAkUsP replied to the thread PBS ZFS disk speed thoughts option.No firewall. Next week I will show the command to a friend who is more proxmox capable than me. Lets see what he can do. I want to thank everyone for the input here. Been to very very good help. Awsome forum. After learning more and more about...
-
Iicepicknz posted the thread Guest VMs freeze PVE 9.x kernels 6.17.x and 7.0.x HP ProLiant DL380 Gen9 Haswell Chip (E5-2650 v3) in Proxmox VE: Installation and configuration.Guest VMs freeze 10-250 s (missed vCPU wakeup) on PVE 9.x kernels 6.17.x and 7.0.x on HP ProLiant DL380 Gen9 (Haswell E5-2650 v3) hosts - 6.14.11-x is clean =====================================================================================...
-
Rrobertlukan posted the thread [Custom tool] Mass VM restore from PBS to PVE - useful for DR, Restoration Assurance ... in Proxmox Backup: Installation and configuration.I built a small tool called restore-engine for restoring VMs from PBS onto Proxmox VE. It’s got a web UI, can talk to multiple PBS servers, and supports bulk restores plus recovery plans / drills if you want something a bit more structured than...
-
Kkawano-y replied to the thread Another v8 to v9 "Help Me" thread - systemd-boot package.Hi, Before removing any packages, please post the output of the following commands: bootctl status ls -R /boot/efi/EFI dpkg -l | grep -E 'systemd-boot|grub|proxmox-boot' findmnt / lsblk -f This should help confirm which bootloader is actually...
-
SStimpy68 posted the thread Issues after latest kernel update or packages? in Proxmox VE: Installation and configuration.Hi Guys, I installed the latstest updates last friday on my cluster to: Linux 7.0.14-15-pve (2026-08-26T14:21Z) But ran into some strange issues after that: Rebooting a node migrates the HA VMs to the other node, no issue, but when the node...
-
Ssteve999 replied to the thread How to organise WAN access for RPi with proxmox so it can run of mobile hotspot?.Outbound-only is the mental model that saves the most pain here: a mobile or hotel hotspot puts you behind CGNAT, so nothing inbound will work (no port forwarding, no DDNS). If you need to reach the RPi from outside, run an overlay that calls out...
