Latest activity
-
JJ-Rod replied to the thread PBS ZFS disk speed thoughts option.If you've added your PBS server to the PVE host via the GUI, then you can use my example. If not, use IsThisThingOn's example with the username/etc. since the PVE host doesn't know where to go. --repository <string> Repository URL...
-
CchOzcA75vE0poCY0F6XC reacted to Jimbambuli's post in the thread [SOLVED] communication issue between SRIOV VM VF and CT on PF bridge with
Like.
Fair point, and you are right that it is a lot. I have added a note to the README: most of the code and docs were written by Claude working from my direction, on my hardware. What is not generated is the measurements. Every hardware claim comes... -
JCan you run the benchmark command on your PBS host? My setup is some pretty old hardware with six disk RAID10 with 7200RPM WD4002FYYZ: (Forgot to mention, this is with mirrored SSDs as a special device.)...
-
JThere is a long discussion here: https://forum.proxmox.com/threads/yet-another-zfs-on-hw-raid-thread-with-benchmarks.138947/ The problem is that ZFS is a sensitive topic, so to speak, so conversations seem to turn in to religious discussions with...
-
JWhat you call "span" is "VDEV" for ZFS and their number does matter a lot, especially when dealing with very slow drives. 5400 rpm SATA is basically as slow as you possibly could be. 6 drives in RAIDZ2 are only one VDEV and give write...
-
JJohannes S reacted to Neobin's post in the thread [SOLVED] virtiofs and running out of file handles with Like.
For reference: https://bugzilla.proxmox.com/show_bug.cgi?id=7984
-
Jjdancer replied to the thread Upgrade 8 to 9 on HP DL360 G7.Just did a clean install of my Supermicro home rack server from PVE8 to PVE9. Yeah, I wait until the last minute. No worries, I've been clean installing PVE9 at work on Dell servers since PVE9 came out. Prefer clean installs. Got punked too many...
-
DYou cannot set the time in an LX(C) container the way you would, because you only have ONE clock on the host. The offset is due to different timezones (I suppose e.g. UTC vs CEST, which is exactly 2h at the moment). Just run dpkg-reconfigure...
-
JSorry, but this has nothing to do with PVE itself. If everyone starts to ask os specific questions for their virtual machines because they run on PVE the forum will explode. You won’t call your car dealer if you’re stuck in heavy traffic. Just a...
-
JI'd use apt autopurge "*fwupd*". Not sure it makes sense to have this in a normal VM.
-
Sscyto replied to the thread [SOLVED] Hailo 8 ai m.2 card crashes server when using passthrough..oops i meant to say disabled not enabled and yes the reset method can work for many issues, but not all.... glad you fixed it for reference the issue is caused when the hailo8 driver loads it reloads the firmware causing a hot plug event on the...
-
AAkUsP replied to the thread PBS ZFS disk speed thoughts option.Cant get it right.. if we say Im in shell on one of me PVE: My user on my pbs is jonnyknox@pbs My IP on my PBS 192.168.1.100:8007 My datastore on PBS is called bigvolume How should it look then?
-
RRobertyu posted the thread Intel 10Gb X540 Card recognized but bridge adapter does not pull ip address in Proxmox VE: Networking and Firewall.First post here... Just setup another Proxmox node in another full-size PC (intel 13th gen), and the onboard nix works fine. I added a Vimin dual-port 10Gb networking card, and cannot get it to work in Proxmox. Here is a link for the card I...
-
Just an FYI. If anyone is contemplating or nervous about upgrading (in place 8 to 9) on their older HP DL360 G7 units, I have done 3 of them and they all seem to be running fine (ours have the RAID Smart Array P410i). There was a warning from... -
Ppaase84 replied to the thread [SOLVED] Beherrscht PMG v9.0.6 kein ARC-Signing?.Klar ist die README ki. Warum soll ich sowas selbst schreiben? Und als Hobby Coder (Programmierer würde ich mich nie nennen, weil das 'ne Beleidigung für Programmierer und Entwickler wäre) kann ich den Code schreiben, lesen und prüfen. Man...
-
Sstra4d posted the thread Upgrade 8 to 9 on HP DL360 G7 in Proxmox VE: Installation and configuration.Just an FYI. If anyone is contemplating or nervous about upgrading (in place 8 to 9) on their older HP DL360 G7 units, I have done 3 of them and they all seem to be running fine (ours have the RAID Smart Array P410i). There was a warning from...
-
Wwerscajk posted the thread [TUTORIAL] Windows XP with a working passed-through GPU on PVE 9.2 — and the two `pci-bridge` devices you have to strip to get there in Proxmox VE: Installation and configuration.This is repost from r/Proxmox because this forum will be better place to hold my tutorial / findings that are worth to share. I have four GPU-passthrough seats running simultaneously on one PVE 9.2 node: two Windows XP SP3 and two Windows 7 x64...
-
Bbreakaway9000 posted the thread [SOLVED] VFS: Unable to nount root fs on unknown-block(0,0) after installing updates in Proxmox VE: Installation and configuration.I have a 3 node cluster. I updated the first one & rebooted, went smoothly. Then I went to update and reboot the second, but it wouldn't boot up: VFS: Unable to mount root fs on unknown-block(0,0) I rebooted and went into advanced options, and...
-
-
JJimbambuli replied to the thread [SOLVED] communication issue between SRIOV VM VF and CT on PF bridge.Fair point, and you are right that it is a lot. I have added a note to the README: most of the code and docs were written by Claude working from my direction, on my hardware. What is not generated is the measurements. Every hardware claim comes...
-
SSelfMan replied to the thread e1000 driver hang.I've posted the watchdog script in here https://forum.proxmox.com/threads/proxmox-6-8-12-9-pve-kernel-has-introduced-a-problem-with-e1000e-driver-and-network-connection-lost-after-some-hours.164439/post-867621
