Latest activity
-
PPigi_102 replied to the thread Resize imported ( from esxi ) disks, possible ?.Yeah, that's exactly what I found.Detached and reattached the disks as scsi instead of block and voila ! SSD is back again. Thanks very much !
-
PPigi_102 reacted to leesteken's post in the thread Resize imported ( from esxi ) disks, possible ? with
Like.
Be sure not to over-commit and run into VMs running into I/O errors because the host has no more disk space. I can't tell from just your information but the manual states: Note that SSD emulation is not supported on VirtIO Block drives... -
Rrandyqx replied to the thread falling over to a zfs replica.after qm migrate, the source image remains on the source node, if i free it, it comes back! # qm list VMID NAME STATUS MEM(MB) BOOTDISK(GB) PID 100 archive.psg.com running 2048 128.00 2716...
-
PPigi_102 replied to the thread Resize imported ( from esxi ) disks, possible ?.I've done the steps indicated and it seems I really got back lot of unused space. Thanks very much. Now I only need to figure why some vm disks have the chance to change the ssd emulation and some don't :) Back on manuals ! Pigi
-
aL1aL7 replied to the thread VM Disks nach dem Verschieben auf anderes Storage defekt/korrupt.Wo steht dass Dell 4 Pfade empfiehlt? Das hätte ich nirgends gelesen. Hast Du hierzu einen Link? Warum sollte der Fehler mit der Config vom Dell zu tun haben? Aber ja ist ein Thin-Pool. Wenn die VM läuft funktioniert der Move ja ohne Probleme... -
DDju reacted to t.lamprecht's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
I think soo too (already saw your earlier pointer to that - thx!), we'll pick this up for the next kernel build.
-
DDju reacted to janus57's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Hi, i really think your issue is fixed by this : https://github.com/torvalds/linux/commit/691b052139c94ee6640ac39e0b764dd3867897c0 Best regards,
-
Eesnmb replied to the thread High Availability Functionality.OK. Thanks for the response. I'll check that again. My lab seems to be "quirky".. Migrations work just fine, then randomly get stuck migrating...
-
SInisterPisces replied to the thread [VirtIO NICs] Help understanding when to use multiqueue in VMs?.Thanks for including that, @Onslow . I should have excerpted that in my OP. I suppose a better way to ask is what people find to constitute sufficiently high incoming traffic. I believe it's helpful with Wireguard and other VPNs, for instance... -
IiDLA replied to the thread Proxmox installation failed on "bootloader setup errors: unable to install initramfs".work for me also thank you so much
-
IiDLA reacted to Pandorian's post in the thread Proxmox installation failed on "bootloader setup errors: unable to install initramfs" with Like.
Reporting the same issue. The same error was produced when trying to install 9.2.1, but the 8.4.1 installation was fine. Update: solved my issue by adding intel_iommu=sp_off to the grub menu on 9.2.1 installation.
-
SInisterPisces reacted to Onslow's post in the thread [VirtIO NICs] Help understanding when to use multiqueue in VMs? with Like.
Hello, @SInisterPisces You have probably studied this already, but just in case I'm giving the link to the fragment on the subject: https://pve.proxmox.com/pve-docs/chapter-qm.html#qm_network_device - section "Multiqueue". It gives technical...
-
Ggasherbrum replied to the thread High Availability Functionality.if you press the shutdown button via proxmox gui it will shut down and stay turned off, however if it is done via the guest OS it will turn back on (with HA enabled) - i also noticed this coming from vmware and its annoying, proxmox has some...
-
Oder es kommt noch dicker und die VM treibt die physische CPU in den Deadlock, was mit dem Reboot des Servers einherging. -
If I recall correctly it's entirely possible to use ZFS with HW-RAID if (and only if!) you don't build a pool but instead uses the virtual disc provided by the RAID-Controller in a single-device-pool. @Falk R. mentioned such a setup in the...
-
Falk R. replied to the thread Proxmox VE 9.2 – kompletter Host-Freeze / Hardreset nötig.Ich habe da nicht so viel Ahnung von Customer Hardware, aber HM80 und HM90 habe ich schon oft mit diesen Problemen gehört. Komischerweise treten da die Fehler nicht auf wenn man ein nacktes Debian13 installiert. Entweder mögen die Dinger keine...
-
Falk R. replied to the thread VM Disks nach dem Verschieben auf anderes Storage defekt/korrupt.Das kommt drauf an wie deine DELL ME4 konfiguriert ist. Warum hast du eigentlich 8 Pfade? Default und Empfehlung DELL sind 4 Pfade. Nutzt du einen Thin Pool in der ME?
-
Wweppa reacted to bdr's post in the thread Increased latency on disks since 9.2.6 and associated 7.0.x kernel with Like.
I tested and can confirm the problem is not present in kernel 7.0.14-5-pve
-
JJohannes S reacted to kegloadam's post in the thread [SOLVED] virtiofs and running out of file handles with Like.
One could take a good hard look at the command line options of virtiofsd to see what else makes sense in the context of PVE. Exposing --readonly might be a good idea, for example. Since you suggested it I'll go and open a ticket.
-
JJohannes S reacted to alexskysilk's post in the thread Can a Proxmox VM Feel Like Bare Metal? Dual 144Hz + GPU Passthrough + Low Latency with Like.
Thats an unreasonable metric. "maximum" means nothing here. All you can do is use best practices for your guest OS. whether that yields acceptable results is up to the operator to determine- slow storage will impact your experience way more then...